Quotation Are Invited For A Bench-Top Pressurized Filtration Vessel Used For Membrane Process Development And Screening, Operated Using An External Compressed Air Or Inert Gas Source

Quotation are invited for A Bench-Top Pressurized Filtration Vessel Used for Membrane Process Development and Screening, Operated Using an External Compressed Air or Inert Gas Source Pressure Drop & Flow Rate along Hyperdem Last Date for Submission: 31/08/2026 Remarks [EQUACSAEE0010] A bench-top pressurized filtration vessel used for membrane process development and screening, operated using an external compressed air or inert gas source. The unit should allow convenient loading of a flat membrane disc, a low internal dead volume, and safe operation at elevated pressure and temperature. Equipment Type: Pressurized stirred (dead-end) filtration cell for laboratory membrane process development. Membrane Disc Size: Approx. 4555 mm diameter (flat disc format). Active Membrane Area: Approx. 1020 cm². Processing (Vessel) Volume: Approx. 250350 mL capacity. Hold-Up (Dead) Volume: Low hold-up design; target 23 mL. Maximum Operating Pressure: At least 6070 bar ( 9001000 psig); higher pressure option (150+ bar) desirable. Maximum Operating Temperature: At least 100125°C at rated working pressure. Pressure Source: Operable from a standard compressed air or inert gas supply; no pump required. Cell Body Construction: Corrosion resistant stainless steel (e.g., 316 series or equivalent); higher alloy option for aggressive media. Sealing Components (O Rings/Gasket): Elastomer seals (e.g., nitrile as standard), with chemical resistant elastomer or PTFE options. Stirring Mechanism: Integrated magnetic stir bar (PTFE or equivalent inert coating); optional motorized stirrer accessory. Wetted Connections: Standard threaded pressure inlet fitting; metallic tubing outlet for filtrate/permeate collection. Cell Design: Two-piece or multi-piece body allowing top fill and bottom access for membrane loading/replacement. Sterilization: Wetted components suitable for autoclaving/sterilization. Form Factor: Compact benchtop unit, single-person operable. Application Range: Suitable for microfiltration, ultrafiltration, nanofiltration, reverse osmosis, and related membrane screening applications. Required Features: Accessible fill port or removable top for loading process solution. Removable/openable base for straightforward membrane installation and replacement. Low internal dead volume to minimize waste of process/test solutions. Pressurization via standard compressed gas supply; pump not required for operation. Compatible with commonly available flat membrane discs across standard membrane classes (MF/UF/NF/RO and similar). Wetted parts suitable for autoclaving or chemical sterilization. Optional accessories acceptable: motorized stirrer, pressure regulator, relief/bleed valve, supply hose, stirring plate. Warranty: minimum 1 yeay Tender Link : https://tenders.squ.edu.om/AllCategs