Tenders Are Invited For Renovation Of The Street Główna In Kamienna As Part Of The Task: Modernization Of Główna Street In Kamienna

The Subject Of The Order Is The Modernization Of A Municipal Road With A Length Of Approx. 595 M And An Average Width Of 4.33 M (4.00 - 4.50 M) - Plots No. 358, 388 (Beginning At The Pedestrian Crossing At Ul. Kępińska, Ending At The Junction Of The Improved Surface Made Of Granite Cubes And Asphalt Surface), In Particular: • Mechanical Drainage Of Roadsides With Removal Of Aggregate And Disposal,• Insertion Of 12X25cm Concrete Curbs On Concrete Benches With Resistance In The Roadsides,• Construction Of A Surface With 8 Cm Thick Concrete Paving Stones On A Cement-Sand Ballast - Roadside,• Relocation Of Driveway Blocks To The Property,• Vertical Adjustment Of Sewage And Water Wells,• Sprinkling The Road Surface With Asphalt,• Laying Sealing Tape On The Connection Asphalt With Paving, • Strengthening The Slopes On The Road Side With Openwork Concrete Slabs, • Making An Ac 11S Abrasive Asphalt Layer With A Thickness Of 5 Cm After Compaction, • Introducing Traffic Organization: Dismantling Poles And Signs, Installing New Ones - In Accordance With The Target Traffic Organization Design, • Tidying Up The Adjacent Area After The Works Are Completed. Requirements: 1) For The Works Covered By The Task, The Contractor Will Provide A Warranty For A Minimum Period Of 3 Years And A Maximum Of 5 Years, Counting From The Date Of The Final Acceptance Report Of The Works.2) After Completing The Works, The Contractor Is Obliged To Prepare An As-Built Cost Estimate With Measurements Of The Works Performed And Obtain Its Acceptance By The Employer. Additional Requirements: 1) The Costs Of Marking And Securing The Works For The Duration Of The Works Should Be Included;2) The Contractor Is Responsible For The Protection Of Installations Of Underground Devices Located On The Ground Surface, Such As: Valves, Wells, Hydrants, Etc. About The Fact Of Accidental Damage To These Installations, The Contractor Will Immediately Notify The Employer And The Interested Operator Of These Devices And Will Cooperate With Them By Providing All Assistance Needed To Make Appropriate Repairs And Will Cover The Costs Of These Repairs;3) The Wearing Course Should Be Made Over The Entire Width Of The Road;4) The Costs Of Collecting At Least 3 Samples Of The Bituminous Surface Should Be Included (The Place Of Collection Is Indicated By The Employer) And Submit The Test Results To The Employer;5) The Contractor Is Fully Responsible For Any Disruptions To Road Traffic As Well As Damages And Losses Resulting From The Works;6) All Materials Used To Carry Out The Task Must Be Of The First Quality And Must Have Approvals, Certificates And Technical Approvals Allowing For Use In Construction (Attestations, Certificates And Approvals Should Be Provided To The Ordering Party) And Must Be At Least Technically Equivalent To Those Accepted In The Bill Of Quantities;7) After Completion Of The Works, Waste Should Be Removed And The Construction Site And The Area Adjacent To The Construction Site Should Be