Tenders Are Invited For Reconstruction Of The Road Section In Rysie - Stage 1

4.1. The Subject Of The Order Is Reconstruction Of The Road Section In Rysie - Stage 1.4.2. Subject: The Task Involves The Reconstruction Of A 227 M Long Road Section In The Town Of Rysie - Stage 1 On The Plot With Registration Number 329, Rysie District, Dębe Wielkie Commune. Municipal Category Road - Class D. The Scope Of The Subject Of The Order Includes The Construction Of A 5.0 M Wide Road With A 2% Transverse Road Inclination Symmetrically From The Road Axis Towards Both Its Edges And 0.5 M Wide Roadsides With A 6% Inclination Towards Roadside Ditches. The Design Documentation Assumes The Final Construction Of Roadsides With A Width Of 0.75 M, However, As Indicated Above, The Subject Of The Order Includes The Construction Of Roadsides With A Width Of 0.5 M. In Addition, The Design Documentation Provides For A Lower Filtration Layer On The Roadside Made Of Natural Aggregate Up To 15 Cm Thick, And The Ordering Party Informs That Natural Soil Should Be Used As The Filtration Layer And, In Accordance With The Bill Of Quantities, Only An Upper Layer Of 10 Cm Thick Aggregate Should Be Made After Compaction. Broken. List Of Areas Covered By The Scope Of The Order: - Road Area - 1,135.0 M2; - Roadside Area - 227 M2. The Scope Of Work To Be Performed Includes: - Measurement Works On Earthworks On Roads In Plain Terrain (0.227 Km); - Earthworks Performed With Backhoe Excavators With A Bucket Capacity Of 0.40 M3 In Soil Category Iii-Iv With Transport Excavated Material With Self-Unloading Vehicles Over A Distance Of 1 Km (Including Desilting The Ditch) (45.4 M3); - Supplementary Outlays For Tables For Each Further 1 Km Of Transport Distance Over 1 Km With Self-Unloading Vehicles For Soil Of Categories I-Iv On Hardened Roads - Times 5 (45.4 M3); - Subbases Made Of Crushed Aggregates Slabs. Down. 0/31.5Mm Top Layer, Layer Thickness After Compaction 10Cm (5.2M*227M=1180.4M2);‒ Sprinkling The Surface With Asphalt (5.1M*227M=1157.7M2);‒ Surface Made Of Asphalt Mineral-Bituminous Mixtures (Binding Layer), Layer Thickness After Compaction 5Cm (5.1M*227M=1157.7M2);‒ Sprinkling The Surface With Asphalt (5.0M*227M=1135M2);‒ Surface Made Of Mineral-Bituminous Asphalt Mixtures Standard Ii - Wearing Course, 4 Cm Thick After Compaction (5.0M*227M=1135M2);‒ Roadside Made Of Crushed Aggregates, Upper Layer, Layer Thickness After Compaction 10 Cm (2 * 0.5 M * 227 M = 227 M2); - Geodetic As-Built Inventory (1 Pc.).