Tenders Are Invited For Park And Playground Equipment - Delivery And Installation Of Equipment Along With Land Development For The Task: Construction Of A Playground And Land Development At Primary School No. 11 At Ul. Janusza Korczaka 34 In Elbląg

Park And Playground Equipment - Delivery And Installation Of Equipment Along With Land Development For The Task: Construction Of A Playground And Land Development At Primary School No. 11 At Ul. Janusza Korczaka 34 In Elbląg. 1. The Subject Of The Order Is The Delivery And Installation Of Equipment And Landscaping Works On The Playground Located On The Premises Of Primary School No. 11 At Ul. Janusza Korczaka 34 In Elbląg, Plot No. 66/2, District 4. Main Place Of Delivery And Works: Primary School No. 11, Ul. Janusza Korczaka 34, 82-300 Elbląg Plot No. 66/2, District 4 2. The Scope Of The Subject Of The Order Includes The Following Works: 1) Preparatory Works In The Field Of Land Development: A) Disassembly And Removal From The Playground Of The Devices Indicated In The Design Documentation, B) Cleaning Works And Preparation Of The Area, C) Earthworks In The Field Of Land Leveling. 2) Delivery And Installation Of Playground Equipment: A) Playground Equipment:  Large Play Set - Grasshopper - 1 Pc.  Integration Carousel - 1 Pc.  Storks Nest Swing - 1 Pc.  Trampoline - 3 Pcs.  Educational Panel - 1 Pc.  Panel - Xylophone - 1 Pc. Double Swing – 2 Pcs.  Ram Swing – 1 Pc.  Sandbox With Sand – 1 Pc.  Weight Swing – 1 Pc.  Spring Rocker – 2 Pcs.  Set With A Slide – 1 Pc.  Football Goal – 2 Pcs. B) Elements Of Small Architecture:  Shade Sail - 1 Pc.  Bench With Backrest - 6 Pcs.  Park Waste Bin - 2 Pcs.  Board With Regulations Of Use 1 Pc. (Board Dimensions 500 Mm X 700 Mm, Legible Text Along The Longer Side). 3) Construction Of Safe Surfaces In The Required Places On The Playground In Accordance With The Design Documentation And The Requirements Of The Device Manufacturer In Terms Of Fall Safety: A) Hardened Pedestrian Surface Made Of Concrete Cubes With A Concrete Edge, B) Aggregate Pedestrian Surface (Clay-Sand, Gravel) With A Granite Edge, C) Safe Sand Surface With A Rubber Edge, D) Polyurethane Safe Surface With Concrete Edge Covered With A Layer Of Epdm, E) Grass Surface (Reclamation/Seeding). 4) Construction Of A Fence: A) Panel Fence With Posts In Accordance With The Design Documentation, B) Fence Gate - 1 Pc. C) Ball Catches In Accordance With The Design Documentation. 5) Planting Greenery In Accordance With The Design Documentation - Planting Shrubs And Trees, 6) Finishing And Cleaning Works After The Works - Leveling The Area, Cleaning, Tidying Up The Area, Laying A Lawn In Places Where The Existing Lawn Was Damaged And In Places Provided For In The Design Documentation. 3. Post-Assembly Inspection (Playground Certification Inspection Report) 4. The Completed Playground Should Meet The Requirements Of The Pn-En 1176 And Pn-En 1177 Standards Or Equivalent. For Each Device, The Safety Zones Provided By The Manufacturer Must Be Observed And The Recommended Installation Instructions For The Playground Should Be Followed. After Completing The Installation Of Playground Equipment, The Contractor Must Ensure That A Post-Installation Inspection Is Carried Out To Assess Compliance With The Relevant Parts Of The Pn-En 1176 And Pn-En 1177 Standards Or Equivalent. The Inspection Document Confirms This