Request For Quotation Purchasing Goods Used For Medical Purposes

Medical Table (Manipulation, 2 Stainless Steel Shelves, 2 Drawers - Metal Is Intended For Placing Instruments, Materials And Medicines. The Design Of The Table Is Collapsible. The Frame Of The Table Is Made Of A Welded Steel Profile Of 20 Mm Round Section Made Of Stainless Steel. The Table Has Two Drawers, Two Stainless Steel Panels And Two Handles. The Table Is Equipped With Four Wheels With A Gray Tire Made Of Antistatic Rubber With A Diameter Of 50 Mm Two Of Which Have An Individual Brake). The Supplier Must Provide Related Services For Transportation, Unloading And Assembly (If Necessary), Pp Tube 50 Ml (Falcon Type) In Individual Sterile Packaging., The Polymer Container Package Is Designed For Transporting Samples Of Biological Material In Test Tubes, Vials, And Containers For Analysis. Laying Should Ensure The Safety Of Biological Material From External Factors. The Stand Holes Are Designed To Accommodate Test Tubes Ø13-17 Mm And Height H=75-170 Mm (Cylindrical, Biological); Conical Tubes, Monovets, Vacuum Tubes; Test Tubes Ø8-11 Mm And Height H=40 Mm (Micro Tubes). The Tripod Must Have Combination Holes In The Shape Of Eights, Formed From Two Holes Of Different Diameters 18 And 11.2 Mm. There Should Be Alphanumeric Markings Around The Perimeter Of The Tripod. The Components Of The Installation And Its Components (Tripod, Boxes, Cassette For Bottles) Must Be Made Of Impact-Resistant, Chemical-Resistant Plastic That Can Withstand Treatment With All Disinfectants, As Well As Steam Sterilization At A Temperature Of 121°C - Autoclaving. The Stacking Handles Are Made Of Stainless Steel. Overall Dimensions (410X350x215) (255)*)±30 Mm (With Raised Handles), The Bedside Table Is Designed To Be Installed Near The Patient’S Bed. The Tabletop Must Withstand Wet Disinfection. The Design Of The Table Involves Installing The Lower Part Of The Table Under The Bed, The Tabletop Itself Is Located Above It. Table Height Adjustment Available. The Table Frame Must Be Equipped With Caster Wheels. The Table Frame Should Be Made Of Metal And Covered With Enamel. The Tabletop Must Be Adjustable In Height And Angle Of Inclination. The Load On The Table Must Be At Least 15 Kg. Frame Material: Steel. Tabletop Material: Composite. The Color Of The Tabletop Is White, The Edge Is Gray. Wheel Diameter: About 5Cm. Dimensions Length 760Mm, Width 380Mm, Height 750-1150Mm. Gost 16371-2014.