Tenders Are Invited For Reconstruction Of Dirt Roads - Reconstruction Of Ul. Graniczna In Gorzów Wielkopolski

The Subject Of The Order Is The Reconstruction Of Ul. Graniczna - A Municipal Road, On A Section With A Length Of Approx. 205 Meters And Extending From Ul. Graniczna With A Length Of Approx. 83 Meters. In Gorzów Wielkopolski, In Accordance With The Land Development Design (Drawing No. 1 And Drawing No. 2). The Planned Works Will Consist In The Construction Of A Road Surface On The Main Stretch Of Graniczna Street With A Wearing Course Of Ac11s Asphalt Concrete With A Thickness Of 5 Cm, A Binding Layer Of Ac16w Asphalt Concrete With A Layer Thickness Of 5 Cm On The Existing Aggregate Base, Reinforced With A Layer Of Crushed Aggregate. With An In-Out Thickness Of 5 Cm, Local Road Widenings On An Aggregate Base With A Thickness Of Inlet And Outlet 20 Cm And Both Sides Of The Roadsides Made Of Aggregate 20 Cm Thick. In-Out 12 Cm. The Scope Of Reconstruction Of The Reach Located Between Properties No. 8A And 10 Includes The Construction Of A New Permeable Road Surface Made Of Meba Openwork Slabs With A Thickness Of 10 Cm On A Bedding Of 2-5 Mm Thick Stone Dust. In-Out 4 Cm. Additionally, Along The Reach Section, A Subbase Of Crushed Aggregate 0-31.5 Mm With A Thickness Of 20 Cm And A Drainage Layer Of Medium-Grained Sand With A Thickness Of In-Out 25 Cm. Locally, It Is Planned To Build A Filtration Shoulder With A Layer Thickness Of 2 X 25 Cm. The Works Will Be Carried Out On The Basis Of The Works Submitted To The Architectural And Construction Administration. The Scope Of The Works To Be Performed And The Technology Of The Works Are Specified In Particular By: A) Design Documentation, B) Technical Specifications For The Execution And Acceptance Of Works, C) Table Of Settlement Elements, D) Draft Contract. Employers Comments: Documents Describing The Subject Of The Order Should Be Treated As Mutually Complementary And Explanatory. If Any Discrepancies, Ambiguities Or Ambiguities Are Found, The Contractor Cannot Limit The Scope Of His Obligation Or The Obligation To Exercise Due Diligence In The Execution Of The Order. If The Documentation Describing The Subject Of The Order Contains An Indication Of The Names Of Materials, Devices Or Technologies, They Should Be Treated Only As Specifying The Required Technical, Operational Parameters Or Quality Standards. The Ordering Party Allows The Use Of Equivalent Materials, Devices And Solutions, Provided That The Technical And Quality Parameters Are Not Worse Than Those Specified In The Documentation. If Standards, European Technical Assessments, Approvals, Technical Specifications Or Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Employer Allows Equivalent Solutions. The Duties Of The Works Manager Who Will Participate In The Implementation Of The Subject Of The Order Will Include: - Organizing And Managing The Construction In A Manner Consistent With The Simplified Design, Bill Of Quantities, Sst, The Employers Requirements And Regulati