Quotation Are Invited For Seat;Child Swing;Playground Equipment

Quotation are invited for Seat;Child Swing;Playground Equipment Delivery Date: 2026/11/10 Delivery To: Logistics - Hillstar Warehouse Complex MATERIALS STORE / PH: 799 5200 Delivery Address: 01 Bamboesvlei Road, Ottery Closing Date: 2026/08/13 Closing Time: 12:00 PM Description: 34 each x seat;child swing;playground equipment Specification: * SEAT - TYPE: Tyre Child Swing; SPECIFICATION: 330mm(13inch) diameter, cross ply, un-rethreaded motor car tyre cut to shape and size containing a drilled 20mm rainwater drain hole in the centre of the seat for drainage once seat is hung (REF DRAWINGS: TYRE SWING, PART A AND PART B). Tyre shall be turned inside out to form seat with no bumps and bulges. No steel capped tyres to be used. Tyre shall not be torn or have steel beading showing or protruding. All Sharp edges shall be cut away and rounded off; ATTACHMENTS: All attachments shall be galvanised iron, with any sharp edges ground smooth. Bolts and nuts shall be wide headed cup fitted type with flat washers. The hanger bracket shall be of 3mm galvanised plate (REF: PART A) and shall be drilled to allow fitting of an 8mm pin diameter screw pin chain shackle. Each swing shall be supplied with two such shackles attached to it. All nuts shall be locked by peening over the bolt end; GUIDELINE: Wherever reference is made to any particular Trademark , Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent".CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. Please submit technical data information with your quote submission.NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/326737