Corrigendum - Quotation Are Invited For Rubber Bellow Dn1200 Pn10/16 Flange Machining To Adjust The Bellow According To Ps Requirement

Quotation Are Invited For Rubber Bellow Dn1200 Pn10/16 Flange Machining To Adjust The Bellow According To Ps Requirement Rubber Bellow Dn1200 Pn10/16 1032603369 1 Item-00001 Rubber Bellow Flanges Machining Clarifications:1. Rubber Bellows Flange Machining: The Supplier Shall Machine Therubber Bellows Flan Ges To Suit The Final Dimensions And Connectionrequirements Of The Pumping Station.2. Dimensional Verification: The Supplier Shall V Erify All Requireddimensions Through A Site Inspection Prior To Machining. Flangemachining Shall Be Carried Out Based On The Verifie D Site Measurementsto Ensure Compatibility With The Pumping Station Requirements.3. Compliance: The Machined Flanges Shall Comply Wi Th The Specifiedflange Standard, Drilling Pattern, Bolt Hole Quantity, Bolt Holediameter, Pitch Circle Diameter (Pcd), Flange Face C Onfiguration, Andface Finish As Required For The Pumping Station Connections.4. Fit-Up Requirements: The Supplier Shall 2 Set Ensure Prope R Alignment Andfit-Up With The Mating Pipework And Equipment To Achieve A Leak-Freeinstallation Without Inducing Undue Stresses On T He Rubber Bellows.5. Approval Prior To Machining: No Machining Shall Commence Until Thesite Measurements, Final Dimensions, And Mach Ining Details Have Beenreviewed And Approved By Dewa.6. Supplier Responsibility: The Supplier Shall Be Fully Responsible Forthe Accu Racy Of All Site Measurements, Machining, And The Compatibilityof The Modified Rubber Bellows With The Existing Pumping Stationinsta Llation.7. Documentation: The Supplier Shall Submit Detailed Dimensionalinspection Reports And Quality Records For Review And Approv Al Prior Todelivery Special Notes / Instructions: Rubber Bellow Dn1200 Pn10/16 Flange Machining To Adjust The Bellow According To Ps Requirement Standard Terms & Conditions 1) Prices Should Be Ddp Delivery Duty Paid At Dewa Stores. 2) Quotation To Be Submitted Only In Local Currency U.A.E Dirhams 3) Dewa Standard Payment Terms Is 30 Days Credit From The Date Of Acceptance Of Material 4) No Dewa Staff Or His Or Her Relatives Up To Third Degree Should Have Ownership Or Partnership In Your Company, And Your Participation In Dewa Tenders / Rfqs Should Not Constitute A Conflict Or Perceived Conflict Of Interest. Supplier Registration: Https://Srm.Dewa.Gov.Ae/Irj/Portal/Anonymous/Regis Tender Link : Https://Srm.Dewa.Gov.Ae/Sap/Opu/Odata/Sap/Zsrm_Rfx_Reg_Bid_Srv/Attachmentset(2332601835)/$Value