Tenders Are Invited For Locks, Keys And Hinges - Electromechanical Locking Of Buildings / Vav

Locks, Keys And Hinges - Electromechanical Locking Of Buildings / Vav. Lock Renovations Will Be Implemented In Ten (10) Properties Located In Vantaa Owned By Vav. The Properties Are: Antaksentie 21, Arinatie 7, Asolantie 22, Keikarinkuja 2, Kolohongankuja 6, Lummetie 11, Maarukarinne 5, Minkkitie 11, Ollaksentie 31 & Sahatie 2. The Locking System To Be Implemented Is Self-Powered, Remotely Controlled, Protected, Adaptable And System-Based Locking, The Aim Of Which Is To Ensure A High Level Of Security For The Property And Its Users Key Security. All Key Sockets And Keys Are Electromechanical And The Basic Operation Of Both Of Them Without Clock And Time Features Must Take Place Without An External Power Source Such As Rechargeable / Replaceable Batteries Or Batteries. All Locks, Including Furniture Locks, Must Be Able To Be Programmed Into The Same Lock So That The Users Same Key Works In All Locks If Necessary. If Necessary, The Keys Must Be Given A Unique Stamp, Which Can Be Used To Distinguish The Keys In The Key Management Software. Time-Controlled / Time-Limited Doors Will Be Equipped With Readers, Enabling Identification. Either A Key Or A Separate Tag Can Be Used As A Tag, As Needed. The Access Tag Must Be Permanently Connected To The Key Of The Locking System, And It Must Be Possible To Create Both From One Software. Key Boxes, Keys And The Necessary Software With Licenses Are Delivered Installed And Programmed So That The Locks And Keys Are In Working Order. It Must Be Possible To Connect Key-Updating Reader Devices Equipped With A Pin Keyboard To The System. For The Sake Of Key Security, Information About Lost Keys Must Be Transferred To The Key From The Remote Reader And Then Transferred To Other Independent Locks. It Must Also Be Possible To Connect To The System The Key Sockets Of The Key Container Used With Mobile Keys And Other Locks Used With Mobile Keys. In The Locks Of The Insurance Interface Doors, The Outer Hemlocks Of Class 1 Key Sockets Approved In Accordance With The Requirements Of Sfs 7020/Sfs 5970 Must Be Used. Access Rights For Locks And Keys Are Agreed Upon In A Separate Locking Meeting Held With The Customer. Exporting The Base Images To The Software With Lock Marks Is Included In The Contract. Locks Are Created In The System Under The Companys Lock. Preparation Of The Offer The Offer Must Be Prepared In Such A Way That The Scope Of Work, Design Work, Locking Design, Programming Work, Necessary Installation And Other Work Are Included In The Offer. The Offer Must Also Take Into Account The Fact That Installing The Products Requires Working On The Door. If It Is Not Possible To Replace Only The Key Seat In The Door, The Bid Price Must Include The Necessary Lock Frames, As Well As Other Components With Installation Work, Including Any Asbestos Work. The Offer Must Include All The Necessary Work, Products And Supplies Fully Installed And Commissioned So That The Systems Are Fully Functional And Documented. The Offer Must Include The Required Number Of Locking Panels Together With The Customer. The Offer Must Also Include The Target Car