Request For Quotation Purchase Of Building Materials For Installation Of Street Lighting

A Flat Conductor 40×4 Mm Is Used In The Construction Of Down Conductors, Grounding Systems And Potential Equalization. Material - Hot-Dip Galvanized Steel. The Strip Is Supplied In A Coil 38 M Long., Stainless Steel Pipe Clamps Are Designed For Fastening Pipes Used In Aggressive Environments Or In Food Production. These Pipe Clamps Are Made Of Aisi 304 Stainless Steel, Otherwise Called A2. Equipped With Epdm Rubber Gaskets To Reduce Noise And Vibration. On Request, Clamps Can Be Supplied With Rubber Gaskets Made Of Silicone Or Fluorosilicone Rubber., Bracket For Console Lamp Pipe - Welded, Diameter 45 Mm (Wall Thickness 1.5 Mm) Reach - 350 Mm Coating - White Powder Enamel The Bracket Parts Are Made Of Steel Sheet, 2 Mm Thick. Recommended Wall Mounting. Incremental Angle Adjustment (15° 1 Step) Up To 75°, Bolat Ozek Pen Aluminum Symdardan Turatyn, Aluminum Bolіgіnіn Zhalp Koldenen Kimasynyn Audany 10-Nan 1250 Mm²-Ge Deyingi As 16 Otkіzgіshi., The K-5 Cap Is Used For Attaching Pin Insulators Of 0.4-10 Kv Overhead Power Lines To Standard Metal Structures And Hooks., Led Street Console Lamp Sku-17 100 W, Tf-20 Low-Voltage Porcelain Pin Insulators Are Designed For Insulation And Fastening Of Wires On Overhead Power Lines (Power Lines), In Switchgears (Ru) Of Power Plants And Alternating Current Substations With Voltage Up To 1000 V, Communication Lines And Radio Broadcast Networks., Main Characteristics Design: 7 Insulated Cores With A Cross-Section Of 6 Square Millimeters. Core Material: Copper (For Example, Kvbbshng-Ls) Or Aluminum (Akvbbshv). Protection (Armor): Two Steel Tapes That Prevent Damage To The Wire When The Ground Is Displaced Or Accidentally Hit. Voltage: Designed For Alternating Voltage Up To 0.66 Kv (Frequency Up To 100 Hz)., The Clamp (Yoke) Is Designed For Fixing Stainless Steel Tape During The Installation Of Various Brackets And Fastening Units On Overhead Line Supports. Installation Is Carried Out Using Tensioning Tools Mbt-003, Mbt-004. The Yoke Is Made Of Stainless Steel And Has Teeth., Hook Kn-18 – Fastening And Mounting Accessory. Made Of Steel, Welded, Painted. Anti-Corrosion Coating Is Provided. The Permissible Breaking Load Is 12800 N. The Hook Has An Additional Hole For Connecting The Grounding Conductor. It Is Used As A Means Of Supporting Fastening Of Sip., Rated Voltage 220/380 V Frequency 50 Hz Rated Current Up To 4000 A Network Type Tn-C, Tn-S, Tn-C-S, It Metering Accuracy Class 0.5S / 1.0 / 2.0 (As Agreed) Number Of Metering Points From 1 To 12 Or More (According To Technical Specifications) Type Of Installation: Wall-Mounted Or Floor-Mounted Communication Interfaces Rs-485, Gsm, 4G, Ethernet, The Avvg Cable Is A Power Cable With Aluminum Conductors With Insulation And A Sheath Made Of Polyvinyl Chloride Plastic. It Has No Protective Cover. Designed For Transmission And Distribution Of Electrical Energy In Stationary Installations At A Rated Alternating Voltage Of 660 V And 1000 V And A Frequency Of 50 Hz. The Cable Is Used In Power Plants, Industrial And Distribution Devices, Local Networks, Lighting Devices And As Electrical Wiring In Residential And Commercial Premises. Category: Avvg Cable Service Life, Months: 120 Installation Temperature: -15+50 °C Purpose: Static Cables At 1 Kv And Above With Aluminum Residential Operating Temperature Range: -50+50 °C Number Of Cores: 2 Unit: M Non-Flammability: No Weight, Kg: 0.113 Conductor Material: Aluminum Insulation: Pvc Plastic Compound Volume, M3: 0.000077 Armored: No Brand: Avvg Shell: Pvc Plastic Compound Hs Code: 8544499509 Shielded: No Outer Diameter Of Cable, Mm: 9.8 Country Of Origin: Kazakhstan Sold Only In Group Packaging: No Warranty Period, Years: 5 Cable Cross-Section, Mm2: 2.5, Bandage Tape Material Steel Cable Diameter 3 Color Silver Dimensions 10*0.7 Mm In Tape Measure 50M, The Single-Phase Electricity Meter Has The Ability To Be Universally Mounted On A Din Rail And In A Panel. Measures Active Energy In Single-Phase Two-Wire Ac Circuits. A Shunt Is Used As A Current Sensor. The Meter Is Designed To Measure Active Energy And Is Used In Residential And Public Buildings., The Contactor Performs The Main Switching Function - Connecting The Electric Motor To The Power Network And Disconnecting It. 2. The Thermal Relay Protects The Engine From Overheating In Case Of Emergency Conditions. 3. Buttons Combined Into A Push-Button Station Allow You To Control The Magnetic Starter Itself. A Magnetic Starter In This Composition Is Irreversible, Since It Does Not Allow Changing The Direction Of Rotation Of The Electric Motor Rotor. The Introduction Of A Second Contactor Into The Design Makes The Magnetic Starter More Complex - Reversible, Which Makes It Possible To Change The Direction Of Rotation (Forward / Backward). To Prevent The Simultaneous Activation Of Both Contactors (Leading To An Accident), A Mechanical Interlock Must Be Installed. Magnetic Starters Are Widely Used In The Control Of Machine Tools, Thanks To The Self-Locking Of The Electromagnetic Relay, Which Prevents Spontaneous Starting Of The Electric Motor (Zero Protection). Magnetic Starters Are Also Used To Remotely Start And Stop Electric Motors And Protect Them From Overloads. Advantages Of Magnetic Starters Of The Le1-D Fato Series: - Low Noise; - Light Weight (Plastic Body); - Low Energy Consumption; - High Productivity (Up To 3000 On/H); - Safe And Reliable Operation., A Steel Circle Is A Type Of Rolled Metal That Has A Round Cross-Section Without A Hollow Space. They Are Made From Hot-Rolled Or Cold-Rolled Steel. Meets All Gost Standards. Brand St3 Has Many Positive Characteristics. In Stock And On Order, A Circle With A Diameter Of 22 Mm., Aluminum Cable Lug Ta 16, Secured By Crimping, Is Intended For Terminating Wires And Cables With Aluminum Conductors With A Cross-Section Of 16 Mm2. The Tip Is Made Of Aluminum Pipe, The Tn-2 Cross-Beam Is Designed For Single Fastening Of Wires, Performed When Installing Supports For Overhead Power Lines With A Voltage Of 0.4 Kv. Traverse Material Steel Weight 2.7 Kg, The Circuit Breaker Is Used In Electrical Networks For A Wide Variety Of Purposes. The Device Can Be Seen Both In The Panel Of A House Or Apartment, And As Part Of The Electrical Equipment Of A Large Industrial Enterprise. The Device Provides Power Supply To The Facility And Automatically Turns Off The Voltage In Case Of Overloads And Short Circuits. Thus, This Switching Device Protects All Types Of Equipment Connected To The Network From Failure In The Event Of Emergency Situations. The Device Body, Made Of A Special Dielectric Material, Is Placed On A Din Rail.