Request For Quotation 01. Materials For The Construction Of Building 380 (Rooms 367, 387)

Iae. Electric-Welded Pipe 108X2.5 Is An Electric-Welded Steel Pipe With An Outer Diameter Of 108 Mm And A Wall Thickness Of 2.5 Mm. Steel Grade 09G2s. The Length Of The Pipe Is At Least 6 Meters. Gost 10705-80. Certificate., Iae. Electric-Welded Pipe 45X2 08Х18н10т - Stainless Steel Electric-Welded Pipe With An Outer Diameter Of 45 Mm. And A Wall Thickness Of 2 Mm. Steel Grade 08Х18н10т. The Length Of The Pipe Is At Least 6 Meters. Gost11068-81. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: Conductometric Type Level Sensors Are Designed For Level Gauges Of Liquid Levels (Water, Milk, Food Products - Weakly Acidic, Alkaline, Etc.). Number Of Electrodes - 3. Electrode Material: Stainless Steel. 12Х18н10т (Aisi 304). Case Material – Plastic. Maximum Operating Temperature Up To Plus 70°. The Pressure Of The Measured Medium Is Not More Than 2 Mpa. Connecting Dimensions G1/2, S24. Certificate., Iae. The Drive Is Pneumatic, Multi-Turn. Double-Acting Piston Pneumatic Actuator With Rack And Pinion Mechanism, Designed For Automatic Control Of Shut-Off Valves (Ball Valves, Butterfly Valves). Cylinder Diameter 75 Mm. Rotation Angle 0° - 90°±5°. Operating Pressure From 2 To 8 Bar (Max. 10 Bar). Air Connection: G1/4 Inch. Temperature Range: From Minus 20 To Plus 80. Working Medium: Purified Compressed Air Or Inert Gas. Housing Material: Anodized Aluminum Alloy (Often With A Polyester Coating). Gost 34287-2017. Operating Manual/Instructions. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: Conductometric Type Level Sensors Are Designed For Level Gauges Of Liquid Levels (Water, Milk, Food Products - Weakly Acidic, Alkaline, Etc.). Number Of Electrodes - 1. Electrode Material: Stainless Steel. 12Х18н10т (Aisi 304). Case Material – Plastic. Connecting Dimensions M20×1.5 Mm, S27. Pressure Of The Measured Medium, No More Than 0.1 Mpa. Maximum Operating Temperature Up To Plus 100°C. Working Position: Vertical And Horizontal. Tank Type: Open And Closed. Certificate., Iae. Lock Nut Dn-25 Mm, Designed For Connecting Steel Pipes Used For Water Supply Systems. Made Of Stainless Steel. Gost 8968-75. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: The Rod (Electrode) Is Designed For Use With A Conductometric Sensor To Monitor The Level Of Water Or Liquid. Length Not Less Than 0.5 M. Corrosion-Resistant Metal Rod Made Of High-Quality Stainless Steel 12Х18н10т (Aisi 304). It Has A Connecting Size Of M3×0.5 Mm. Rod Diameter 3 Mm. Conductor Measurement Method. Certificate., Iae. Eccentric Transition, Stainless Steel 12Х18н10т For Connecting Pipes With A Diameter Of 57 Mm And 45 Mm Gost 17378-2001. Certificate., Iae. Clamp 2.1 43X12 N - Metal Clamp For Fixing Pipes Of Type 2, Version 1, Diameter 43 Mm, Width 12 Mm, Made Of Stainless Steel. Gost 28191-89. Certificate., Iae. The Solenoid Valve Is Normally Closed. Designed For Remote Control (Opening And Shutting Off) Of Flows Of The Working Medium (Water), Dn-25 Mm, Maximum Pressure Not Less Than 1.0 Mpa, Stainless Steel Case, Voltage 24 V. Passport. Warranty Card. Warranty Period Is At Least 12 Months. Gost 22413-89. Certificate., Iae. Sleeve With Thread Braid B (I)-6.3-32-43. Construction: Inner Rubber Layer, Several Layers Of Textile Frame And Outer Rubber Layer. Purpose: Supply Of Gasoline, Kerosene, Diesel Fuel And Petroleum-Based Mineral Oils. Inner Diameter 32 Mm. Outer Diameter 43 Mm. Pressure 6.3 Atm. Gost 18698-79. Certificate., Iae. Coupling 25-C Is Designed For Connecting Pipes. Dn-25 Mm. Made Of Stainless Steel. Gost 8966-75. Certificate., Iae. Electric-Welded Pipe 159X2.5 Is An Electric-Welded Steel Pipe With An Outer Diameter Of 159 Mm And A Wall Thickness Of 2.5 Mm. Steel Grade 09G2s. The Length Of The Pipe Is At Least 6 Meters. Gost 10705-80. Certificate., Iae. Flange 25-16-01-2-В-St 10-Ii-Dв 34.5 Is A Flat Welded Steel Flange For Connecting Pipelines With A Nominal Diameter Of 25 Mm. Nominal Pressure Is Not Less Than 16 Kgf/Cm2. Flange Type - 01. Bit Row - 2. Design Of The Sealing Surface - B. Material - Not Lower Than Steel St10. Control Group - Ii. The Internal Diameter Of The Flange Is 34.5 Mm. Gost 33259-2015. Certificate., Iae. The Transition Is Concentric, Stainless Steel 12Х18н10т For Connecting Pipes With A Diameter Of 57 Mm And 45 Mm Gost 17378-2001. Certificate., Iae. Electric-Welded Pipe 108X2 08Х18н10т - Stainless Steel Electric-Welded Pipe With An Outer Diameter Of 108 Mm. And A Wall Thickness Of 2 Mm. Steel Grade 08Х18н10т. The Length Of The Pipe Is At Least 6 Meters. Gost11068-81. Certificate., Iae. Squeegee 25-Ts For Connecting Pipes With A Bore Diameter Of 25 Mm. Made Of Stainless Steel. Gost 8969-75. Certificate, Iae. Steel Pipe Du25x3.2 St10 - Water And Gas Steel Pipe With A Nominal Bore Of 25 Mm. And A Wall Thickness Of 3.2 Mm. Steel Grade St10. The Length Of The Pipe Is At Least 6 Meters. Gost 3262-75. Certificate.