Request For Quotation Purchase Of Materials (Pa)

Description Of The Required Characteristics, Parameters And Other Initial Data Concrete Drill For Rotary Hammers With The Sds-Plus Fastening System: Drilling Diameter: Strictly 6 Mm. Working Length: Not Less Than 100 Mm. Total Length: No Less Than 160 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se)