Request For Quotation Purchase Of Materials (Pa)

Switch On The Left Rated Operating Current: 250A Rated Ac Voltage: 380V/400V/660V Rated Insulation Voltage (Ui): 660 V / 1000 V Rated Current Frequency: 50 / 60 Hz Number Of Power Poles: 3 (Three-Pole) Rated Conditional Short-Circuit Current: 20 Ka (With Fuse Links) Switching Wear Resistance: From 2,500 Vo Cycles Climatic Version - U3 Or Uhl3 Degree Of Protection - Ip00 The Drive Is Located On The Left Side Panel. Handle Type - Side Offset Or Removable Rotary Contact Material Is Electrotechnical Copper With Galvanic Coating. Base Material - Non-Flammable Plastic Or Galvanized Steel. Gost Iec 60947-3-2022 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Change-Over Switch Rated Operating Current (Ie): 400 A Number Of Poles: 4P/3P Switch Positions: I–0–Ii Rated Operating Voltage: No More Than 690 V Ac Mains Frequency: 50/60 Hz Application Category: Ac-23A Manual Control Drive Mounting Method: Mounting Plate/Din Rail Contact Material: Copper Or Copper Alloy With Anti-Corrosion Coating Operating Temperature: -25 °C To +55 °C Degree Of Protection: Not Lower Than Ip20 (For The Device) Gost Iec 60947-3 (Se), Right Hand Switch Rated Operating Current: 250A Rated Ac Voltage: 380V/400V/660V Rated Insulation Voltage (Ui): 660 V / 1000 V Rated Current Frequency: 50 / 60 Hz Number Of Power Poles: 3 (Three-Pole) Rated Conditional Short-Circuit Current: 20 Ka (With Fuse Links) Switching Wear Resistance: From 2,500 Vo Cycles Climatic Version - U3 Or Uhl3 Degree Of Protection - Ip00 The Drive Is Located On The Right Side Of The Side Panel. Handle Type - Side Offset Or Removable Rotary Contact Material Is Electrotechnical Copper With Galvanic Coating. Base Material - Non-Flammable Plastic Or Galvanized Steel. Gost Iec 60947-3-2022 (Se), Changeover Switch Rated Operating Current (Ie): 250 A Number Of Poles: 4P/3P Switch Positions: I–0–Ii Rated Operating Voltage: No More Than 690 V Ac Mains Frequency: 50/60 Hz Application Category: Ac-23A Manual Control Drive Mounting Method: Mounting Plate/Din Rail Contact Material: Copper Or Copper Alloy With Anti-Corrosion Coating Operating Temperature: -25 °C To +55 °C Degree Of Protection: Not Lower Than Ip20 (For The Device) Gost Iec 60947-3 (Se)