Request For Quotation Purchase Of A Pipeline Kit For The Bmp Engine Cooling System

Pipeline Kit For The Bmp Engine Cooling System. Kit Contains: 1. Cooling System Pipe For Supplying Coolant To The Cylinder Head Jacket (Upper Spider With Temperature Sensor) 2. Expansion Tank For The Cooling And Heating System 3. Cooling System Pipe For Supplying Coolant To The Heating Radiators Of The Troop Compartment 4. Expansion Tank Pipe (Upper Slingshot) 5. Set Of Cooling System And Radiator Pipes, Right 6. Cooling And Heating System Pipe (Lower Spider Oil And Water) 7. Coolant Supply Pipe Of The Pre-Heater Boiler (Lower Spider) 8. Return Pipe Of The Cooling System (Consists Of 3 Pipes) 9. Heater Pipe 10. Set Of Cooling System And Radiator Pipes, Left. Technical Characteristics Parameter Value Working Medium Coolant (Antifreeze, Antifreeze) Operating Temperature From –50°C To +120°C Short-Term Temperature Up To +135°C Operating Pressure Up To 0.2 Mpa Test Pressure Not Less Than 0.3 Mpa Internal Diameter 16–38 Mm (At Installation Site) Wall Thickness 2–4 Mm Length According To Design Documentation. Rigid Tubes: 1) Steel 20 Or 09G2s With Anti-Corrosion Coating Inside 2) Aluminum Alloys Can Be Used Flexible Connections: 1) Epdm Type Rubber With Reinforcement 2) Heat-Resistant Rubber Compounds Reliability Requirements Service Life Of At Least: 1) 3000 Operating Hours Or Engine Tbo 2) Maintaining Strength And Elasticity At Low Temperatures (Up To –50°C) 3) Resistance To Aging And Cracking Special Requirements - Products Must Be New, Not Previously Used - Not Refurbished (Repair) Products Are Allowed - Compliance With The Requirements Of Factory Documentation - Domestic Production (Enterprise Or Plant Manufacturing Products In The Republic Of Kazakhstan) - Availability Of A License For The Manufacture Of Spare Parts For Military Equipment