Request For Quotation Purchase Of Goods To Support Business Activities

Updated And Correct Specification: Spare Part. Microwave Oven Timer (1-Dio, 1-Ahch) To Be Agreed With The Supply Manager, Galvanized Steel Sheet. Designed For Construction, Installation And Repair Work. Made From Cold-Rolled Sheet Steel With A Protective Zinc Coating For Resistance To Corrosion And Weathering. Specifications: Material – Galvanized Sheet Steel; Width – 1000 Mm; Length – 1200 Mm; Sheet Thickness – 1.0 Mm; Surface – Flat, Smooth, Without Cracks, Delaminations, Burrs, Dents, Traces Of Corrosion And Other Mechanical Damage; The Zinc Coating Must Be Evenly Applied Over The Entire Surface Of The Sheet And Provide Reliable Protection Against Corrosion; The Sheet Should Be Easy To Machine (Cutting, Bending, Drilling) Without Compromising The Integrity Of The Protective Coating; Products Must Comply With The Requirements Of Gost 14918-2020 Or An Equivalent Regulatory Document; The Product Must Be New, Unused, Supplied In Original Packaging (If Available), With Manufacturers Markings, Date Of Manufacture And Confirmation Of Compliance With Established Requirements. (Application From The Caretaker), Polyethylene Bag. Designed For Household Needs, Collection, Storage And Transportation Of Bulk And Piece Materials. Made From Virgin Or Recycled High- Or Low-Density Polyethylene, Providing Strength And Resistance To Mechanical Stress. Material – Polyethylene; Color – White; Size – 50 × 90 Cm; Load Capacity – At Least 40 Kg; Material Density – At Least 60 Microns; The Bag Must Be Resistant To Tearing, Punctures And Abrasion; Welds Must Be Strong And Airtight, Without Tears Or Defects. The Product Must Maintain Its Performance Properties When Exposed To Moisture And Temperature Changes. The Surface Must Be Clean, Free Of Foreign Inclusions, Holes, Folds, Cracks And Other Defects. The Product Must Be New And Not Previously Used., Refined And Correct Characteristics: Knife-Type Fuse-Link For Low-Voltage Fuses. Designed To Protect Electrical Circuits And Equipment From Overload And Short Circuit Currents. Type – Knife Type, For Installation In The Corresponding Fuse Holder. Rated Current – ​​100 A. Dimensions – 00. Rated Operating Voltage – Not Less Than 500 V Ac. Rated Breaking Capacity – Not Less Than 100 Ka. Application Category – Gg (Gl/Gg) Or Equivalent, Providing Protection Of Cables, Conductors And Electrical Equipment Over The Entire Range Of Overload And Short-Circuit Currents. The Housing Must Be Made Of High-Strength Heat-Resistant Electrical Insulating Material. The Fuse Element Must Be Made Of High-Quality Conductive Material With A Calibrated Response Characteristic. Contact Knives Must Be Made Of Copper Or A Copper Alloy With An Anti-Corrosion Coating. The Product Must Comply With The Requirements Of Gost Iec 60269 Or An Equivalent International Standard. The Product Must Be New, Not Previously Used, Manufactured No Earlier Than 12 Months Before The Delivery Date, In Original Packaging With The Manufacturers Marking, Indicating The Rated Current, Voltage, Standard Size And Date Of Manufacture. (For Replacement In Electrical Switchboards And The Main Body), Wind Screen For Wall-Mounted Air Conditioner. Designed To Change The Direction Of The Air Flow Generated By The Indoor Unit Of The Wall-Mounted Air Conditioner, In Order To Prevent Direct Exposure Of People To Cold Air And Ensure A Comfortable Distribution Of Air Flow In The Room. Technical Characteristics: Type – Screen (Deflector) For The Indoor Unit Of A Wall-Mounted Air Conditioner; Design – Sliding, Universal; Compatibility – Suitable For Most Models Of Wall-Mounted Air Conditioners; Tilt Angle – Adjustable, With The Ability To Change The Direction Of The Air Flow; Material – Transparent Or Translucent Impact-Resistant Plastic (Polycarbonate, Acrylic Or Equivalent); The Material Must Be Resistant To Ultraviolet Radiation, Changes In Temperature And Humidity, And Must Not Deform During Operation; The Fastening Must Provide Reliable Fixation Without Damaging The Body Of The Indoor Unit Of The Air Conditioner; The Design Must Provide For The Possibility Of Repeated Adjustment Of The Angle Of Inclination And Width Without Loss Of Performance Properties; The Surface Must Be Smooth, Without Cracks, Chips, Burrs, Scratches And Other Mechanical Damage; Color – Transparent Or White. The Product Must Be New, Not Previously Used, Supplied Fully Complete, With A Set Of Fasteners And Installation Instructions (If Available), In Original Packaging With Manufacturers Markings, Indicating The Date Of Manufacture And Storage Conditions., Refined And Correct Characteristics: Knife-Type Fuse-Link For Low-Voltage Fuses. Designed To Protect Electrical Circuits And Equipment From Overload And Short Circuit Currents. Type – Knife Type, For Installation In The Corresponding Fuse Holder. Rated Current – ​​40A. Size – 00. Rated Operating Voltage – Not Less Than 500 V Ac. Rated Breaking Capacity – Not Less Than 100 Ka. Application Category – Gg (Gl/Gg) Or Equivalent, Providing Protection Of Cables, Conductors And Electrical Equipment Over The Entire Range Of Overload And Short-Circuit Currents. The Housing Must Be Made Of High-Strength Heat-Resistant Electrical Insulating Material. The Fuse Element Must Be Made Of High-Quality Conductive Material With A Calibrated Response Characteristic. Contact Knives Must Be Made Of Copper Or A Copper Alloy With An Anti-Corrosion Coating. The Product Must Comply With The Requirements Of Gost Iec 60269 Or An Equivalent International Standard. The Product Must Be New, Not Previously Used, Manufactured No Earlier Than 12 Months Before The Delivery Date, In Original Packaging With The Manufacturer’S Marking, Indicating The Rated Current, Voltage, Standard Size And Date Of Manufacture. (For Replacement In Electrical Panels And The Main Body), Set Of Metal Drills (For Electrician), Polyethylene Film. Designed For Household Needs, Protecting Materials And Equipment From Moisture, Dust And Contamination, As Well As Covering Surfaces During Construction, Repair And Other Household Work. Made From High Or Low Pressure Polyethylene, Providing Strength, Elasticity And Resistance To Mechanical Stress. Technical Characteristics: Material – Polyethylene; Color – Transparent; Thickness – Not Less Than 80 Microns; Roll Length – At Least 150 Linear Meters; Roll Weight – At Least 15 Kg. The Film Must Have High Tensile Strength, Elasticity And Puncture Resistance; Must Maintain Performance Properties When Exposed To Moisture And Temperature Changes; The Surface Must Be Smooth, Without Tears, Punctures, Folds, Bubbles, Foreign Inclusions And Other Defects; The Edges Of The Roll Must Be Smooth, Without Tears Or Deformations. The Product Must Be New, Not Previously Used, Supplied In Original Packaging With The Manufacturers Marking, Indicating The Thickness, Roll Length, Weight, Date Of Manufacture And Storage Conditions., Refined And Correct Description: Water-Dispersion (Water-Based) Façade Paint, Acrylic. Designed For Exterior Finishing Work On Concrete, Brick, Plastered And Other Mineral Surfaces. It Must Form A Durable, Weather-Resistant, Vapor-Permeable Coating That Is Resistant To Ultraviolet Radiation, Precipitation And Temperature Changes. Color – Snow-White. The Paint Must Be Washable, Have High Hiding Power, Good Adhesion To The Base, And Resistance To Abrasion And Cracking. After Drying It Should Form A Matte Finish. Should Not Contain Toxic Solvents Or Have A Strong Odor. Packaging – A Bucket With A Volume Of At Least 25 Liters. The Product Must Be New, Not Previously Used, In Original Sealed Packaging With The Manufacturers Marking, Indicating The Date Of Manufacture, Batch Number, Expiration Date And Storage Conditions. Products Must Comply With The Requirements Of St Rk Gost R 52020-2007 Or An Equivalent Regulatory Document., Tool Set According To Technical Specification, Rotary Hammer With 24V Battery (Request From Supply Manager)