Request For Quotation Purchase Of Materials (Pa)

Thickness: 3Mm Width: 1000 Mm Length: 1500 Mm Density: 1.6–2.0 G/Cm³ Operating Temperature: −50 °C To +450 °C Maximum Pressure: No More Than 6.4 Mpa Tensile Strength: Not Less Than 9 Mpa Compressibility: 8–18% Recoverability After Removal Of Load: No Less Than 40%. Purpose: Production Of Gaskets For Flange Connections Of Pipelines Of Heating Networks And Equipment. Working Media: Hot Water, Saturated Steam, Air. Gost 481-80 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Dimensions: 6 × 9 Mm (Width × Height). Material: Brass. Mounting Method: On Din Rail. Connection Method: Screw. Number Of Connections: Usually From 8 To 12 Holes. Rated Current: 100 A. Rated Voltage: 400 V. Temperature Range: -40 To +105°C. Degree Of Protection: Ip00 (No Protection From External Factors). Average Relative Humidity, Not More Than 90% Length: 78 Mm Insulator Color: Yellow. Weight: 32 To 42 G Gost R 51321.1-2007 (Se), Manual Hacksaw Blade Type: Hand Saw Hacksaw Blade Dimensions: 300 Mm (Length) X 13 Mm (Width) X 0.65 Mm (Thickness) Material: Steel With Hardened Teeth Tooth Type: Straight Durability: High Wear Resistance Flexibility: Medium Coating: Anti-Corrosion Coating Tooth Composition: Hardened Metal Operating Temperature: From -10°C To +40°C Gost 6645-86 (Se), Right Hand Switch Rated Operating Current: 250A Rated Ac Voltage: 380V/400V/660V Rated Insulation Voltage (Ui): 660 V / 1000 V Rated Current Frequency: 50 / 60 Hz Number Of Power Poles: 3 (Three-Pole) Rated Conditional Short-Circuit Current: 20 Ka (With Fuse Links) Switching Wear Resistance: From 2,500 Vo Cycles Climatic Version - U3 Or Uhl3 Degree Of Protection - Ip00 The Drive Is Located On The Right Side Of The Side Panel. Handle Type - Side Offset Or Removable Rotary Contact Material Is Electrotechnical Copper With Galvanic Coating. Base Material - Non-Flammable Plastic Or Galvanized Steel. Gost Iec 60947-3-2022 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Hand Wire Brush For Metal Bristle Material: Steel Wire Bristle Length: 20-30Mm Number Of Rows Of Bristles:3 Brush Length: 250-300Mm Brush Material: Plastic Shape Curved Operating Temperature: From -20 ͦ C To +50 ͦ C Weight: 150-250G Gost 28638-90 (Se), Changeover Switch Rated Operating Current (Ie): 250 A Number Of Poles: 4P/3P Switch Positions: I–0–Ii Rated Operating Voltage: No More Than 690 V Ac Mains Frequency: 50/60 Hz Application Category: Ac-23A Manual Control Drive Mounting Method: Mounting Plate/Din Rail Contact Material: Copper Or Copper Alloy With Anti-Corrosion Coating Operating Temperature: -25 °C To +55 °C Degree Of Protection: Not Lower Than Ip20 (For The Device) Gost Iec 60947-3 (Se), Thickness: 2Mm Width: 1000 Mm Length: 1500 Mm Density: 1.6–2.0 G/Cm³ Operating Temperature: −50 °C To +450 °C Maximum Pressure: No More Than 6.4 Mpa Tensile Strength: Not Less Than 9 Mpa Compressibility: 8–18% Recoverability After Removal Of Load: No Less Than 40%. Purpose: Production Of Gaskets For Flange Connections Of Pipelines Of Heating Networks And Equipment. Working Media: Hot Water, Saturated Steam, Air. Gost 481-80 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Concrete Drill For Rotary Hammers With The Sds-Plus Fastening System: Drilling Diameter: Strictly 6 Mm. Working Length: Not Less Than 100 Mm. Total Length: No Less Than 160 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Steeply Curved Steel Bend Outer Diameter: 219 Mm Nominal Diameter (Dn): 200 Mm Wall Thickness: No More Than 8Mm Bend Angle: 90° Material: 20 Carbon Steel Design: Seamless, Steeply Curved Scope Of Application: Heating Networks, Water Supply Systems And Process Pipelines Working Environment Temperature: From -70 To +450 ◦C. Connection Type: Welded Gost 17375-2001 (Se), Switch On The Left Rated Operating Current: 250A Rated Ac Voltage: 380V/400V/660V Rated Insulation Voltage (Ui): 660 V / 1000 V Rated Current Frequency: 50 / 60 Hz Number Of Power Poles: 3 (Three-Pole) Rated Conditional Short-Circuit Current: 20 Ka (With Fuse Links) Switching Wear Resistance: From 2,500 Vo Cycles Climatic Version - U3 Or Uhl3 Degree Of Protection - Ip00 The Drive Is Located On The Left Side Panel. Handle Type - Side Offset Or Removable Rotary Contact Material Is Electrotechnical Copper With Galvanic Coating. Base Material - Non-Flammable Plastic Or Galvanized Steel. Gost Iec 60947-3-2022 (Se), Name: Cutting Disc Type: Abrasive Disc Diameter: 180 Mm Disc Thickness: 1.6 Mm Bore Diameter (Central Hole): 22.2 Mm Processing Material: Stainless Steel Maximum Speed: 8500 Rpm Weight: 0.089 Kg For Cutting Metal Products, Pipes, Profiles And Stainless Steel Sheets Disc Material: Glass Fiber Reinforced Abrasive Composite Shape: Flat Cutting Disc Compatibility: Grinders / Angle Grinders With 180 Mm Disc Temperature Resistance: Should Withstand Temperatures Up To 80-100°C During Prolonged Operation Gost 21963-2002 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Change-Over Switch Rated Operating Current (Ie): 400 A Number Of Poles: 4P/3P Switch Positions: I–0–Ii Rated Operating Voltage: No More Than 690 V Ac Mains Frequency: 50/60 Hz Application Category: Ac-23A Manual Control Drive Mounting Method: Mounting Plate/Din Rail Contact Material: Copper Or Copper Alloy With Anti-Corrosion Coating Operating Temperature: -25 °C To +55 °C Degree Of Protection: Not Lower Than Ip20 (For The Device) Gost Iec 60947-3 (Se)