Tenders Are Invited For Renovation Of Selected Rooms In The Building Of The District Court In Słupca And In The Building Of The District Court In Koło

1.1 Part I Renovation Of Selected Rooms In The Building Of The District Court In Słupca 1.1.1 Guaranteed Order Renovation Of Selected Rooms In The Building Of The District Court In Słupca, Which Includes In Particular: In Building A At Ul. Armii Krajowej 2 Renovation Works In Rooms 208, 207, 209, 210, 211, 212, 204, 203, 201, 205, 206, 105, 106, 108, 110, 115, 116, 102, 103, 104 Consisting Of: Removal Of Furniture And Re-Introduction After Completion Of Renovation Works, Protection Of Furniture And Floors With Foil, Disassembly And Reassembly Of Lighting Fixtures After Completion Of Work, Removal Of The Existing Window And Installation Of A New One (Room 208 And 108), Delivery And Installation Of Window Blinds On The Lower Wings (Room 208), Removal Of The Existing Pvc Floor (Room 208), Installation Of A New Pvc Floor On A Self-Leveling Screed (Rooms 116 And 208), Delivery And Installation Of Threshold Strips At The Junction With The Floors Of Adjacent Rooms (Rooms 116, 208), Preparation Of Wall And Ceiling Surfaces, One-Time Filling And Painting With Latex Paint Twice On The Primed Surface, Replacement Of Lighting Switches,  Dismantling The Existing Suspended Ceiling (Room 210),  Installing A New Suspended Caisson Ceiling With Dimensions Of 60X60 Cm Made Of Compressed Mineral Wool Boards On System Metal Profiles (Room 210),  Painting The Window Jamb (Lintel) At The Suspended Ceiling (Room 210),  Sanding, Staining And Painting Judges Platforms (Rooms 105, 106, 205, 206), Replacing Ventilation Grilles (Rooms 105, 106, 205, 206), Completing The Floor - Improving The Gluing Of Tiles In The Threshold (Room 116), Replacing External Doors: Dismantling The Entrance Door With The Frame, Installing External Doors According To Joinery Assembly, Replenishment Of Plaster From The Inside And Outside And Sealing The Contact Between The Door And Granite Slabs After Replacement, Installation Of An Electromechanical Automatic Drive With A Slide Rail (E.G. Geze Powerturn) Along With The Installation Of A 3 X 2.5 Mm2 Electric Power Supply To The Switchboard (Installation Of A New C16 1P Overcurrent Device), Delivery And Installation Of A Floor Bumper For The Active Door. Renovation Works On Roof - Disassembly Of The Lightning Protection System, - Cleaning And Priming Of The Existing Roofing Felt Made Of Roofing Felt, - Single Covering Of The Top Covering Of The Entire Roof With Thermally Weldable Felt, - Sealing Of The Steel Supports Of The Aggregates - Processing Of Heat Weldable Felt And Making A Steel Clamp Around The Perimeter, - New Lightning Protection Installation With The Installation Of 3 Spikes H = 2.0 M At Air Conditioning Units, Chimney Flashings - Styrofoam Wedges Covered With Roofing Felt, Surface Felt Flashing And A Strip Mounted On Expansion Pins (The Felt Felt Is Extended At Least 30 Cm Onto The Chimney Walls), Renovation Of Chimneys, Replacement Of The Lightning Protection System On The Caps, Painting Of Chimney Plasters. In Buildi