Tenders Are Invited For Modernization Of A Warehouse Building For The Needs Of Civil Protection And Civil Defense In Bytoń

1. The Subject Of The Order Is: Modernization Of A Warehouse Building For The Needs Of Civil Protection And Civil Defense In Bytoń. The Subject Of The Study Is The Implementation Of The First Stage Of Modernization Of The Warehouse Building Located On Plot No. 88/7 In Bytoń, Intended For The Needs Of Civil Protection And Civil Defense. The Scope Of Works Includes Replacing The Roof Covering With Structural Elements And Drainage, Replacing Windows And Garage Doors, And Performing The Electrical Installation.1. Demolition Worksthe Preparatory Works Include: · Dismantling Of The Existing Roof Covering On An Area Of Approximately 589.40 M², · Careful Dismantling Of The Existing Covering Of Asbestos-Cement Boards On An Area Of Approximately 589.40 M², · Securing The Dismantled Panels With Foil And Assembling Them In The Place Indicated By The Investor, · Dismantling Eight Existing Windows Along With Chiseling Out Door Frames, · Dismantling Two Existing Garage Doors With A Total Area Of Approximately 30.31 M². Works Related To Asbestos-Cement Boards Should Be Carried Out By An Authorized Contractor, Observing The Requirements Regarding The Protection Of Employees, The Surroundings And The Handling Of Waste Containing Asbestos.2. Wooden Structure Of Roof Slopesa New Wooden System Is Planned To Be Constructed On The Existing Metal Roof Girders As A Substructure For The Roof Covering. The Scope Includes: · Installation Of Impregnated Wooden Battens On An Area Of Approximately 589.40 M², With A Spacing Adapted To The Existing Structure And The Designed Covering, · Installation Of Wooden Counter Battens On An Area Of Approximately 589.40 M², · Making Eaves Boards From Impregnated Pine Timber On An Area Of Approximately 17.50 M². All Wooden Structure Elements Should Be Protected Against Biological Corrosion And Attached To The Existing Steel Girders Using Appropriately Selected Connectors.3. Construction Of A New Roof Covering. It Is Planned To Make A New Roof Covering On An Area Of ​​Approximately 589.40 M² From Coated Trapezoidal Sheet Metal With A Minimum T55 Profile And A Minimum Thickness Of 0.70 Mm. The Sheet Should Be Attached To The Substructure Using Self-Drilling Screws With Epdm Washers. An Anti-Condensation Layer Should Be Applied On The Underside To Limit Condensation Of Water Vapor. The Scope Of Roofing Works Also Includes: · Construction Of A Ridge Made Of Ridge Tiles Made Of Coated Sheet Metal Over A Length Of Approximately 35.00 M, · Installation Of The Initial Elements Of The Ridge, · Execution Of Sheet Metal Flashings On The Ridge, Eaves, Roof Edges And Other Zones Requiring Protection On An Area Of Approximately 104.21 M², · Installation Of Roof Gutters Semi-Circular With A Diameter Of 150 Mm On A Total Length Of Approximately 70.00 M, · Installation Of Downspouts, Gutter Bottoms And Other System Elements, · Construction Of Downpipes With A Diameter Of 120 Mm On A Total Length Of Approximately 50.40 M, · Installation Of Elbows And Downpip