Tenders Are Invited For Development Of The Area In Front Of The School In Gorenice

The Subject Of The Order Is The Delivery And Installation Of Playground Equipment And Additional Elements Such As A Lockable Display Case And A Shade Sail For The Playground At The Primary School In Gorenice. The Order Covers The Retrofitting Of The Plot At The School In Gorenice With Playground Equipment And Additional Elements In Accordance With The Attached Documentation, Together With The Preparation Of A Post-Construction Geodetic Inventory. The Scope Of The Investment Includes In Particular: A) Delivery And Installation Of Playground Equipment, B) Installation Of A Lockable Display Case, C) Installation Of A Sun Sail, D) Installation Of A Surface Made Of Rubber Mats, Hypertrophic Mats Under A Triple Swing, E) Renovation Of The Grass Surface – Sod (After The Works), F) Replacement Of The Existing Paving Stone Surface, G) Installation Of A Fence Separating The Playground From The Traffic Route, H) Replacement Of The Existing Fence Along With Planting, I) Renovation Of The Turf And Its Implementation Within The Replaced Fence, J) Preparation Of Complete As-Built Documentation, Including The Submission Of The Necessary Documents Allowing The Installed Devices To Be Used (Certificates), K) Preparation Of A Geodetic Inventory As-Built. Characteristics Of The Devices Material Requirements: Device Structure - Steel, Protected With A Zinc Primer And Powder-Coated With Structural Paint. Installation - Mounting Directly In Concrete Foundations. Side Protection And Canopies - Safety Modules, Canopies Are Made Of Hdpe Plastic. Platforms - Anti-Slip Plywood (Optionally With Anti-Slip Hdpe). Elements Made Of Steel - Cleaned, Protected And Powder-Coated With Structural Paint.Screws And Nuts - Galvanized Connectors, With Mushroom Or Hexagonal Heads, With Washers And Self-Locking Nuts.Pipe Transitions - Made Of Pe Pipes With Appropriate Lightness In Accordance With The Pn-En 1176:1-2017-12 Standard.Ropes - Reinforced, Coated With Polypropylene With A Minimum Diameter Of 16 Mm.Plugs For Screws - Screws And Nuts Are Secured With Appropriate Caps. Chains - Din-5 Or Din-6, Galvanized Or Stainless Steel. Slide - High-Gloss Polished Stainless Steel, Sides Made Of Hdpe Board. Metal Profiles - Secured With Plastic Caps. Ground Level - Marked In Accordance With The Pn-En Standard 1176-1:2017-12. Rating Plates - Each Device Is Equipped With A Rating Plate. The Ordering Party Requires That The Playground Equipment Be Brand New, Free From Defects. Criterion For Possession Of Certificates: All Playground Equipment Should Have Approvals And Certificates Meeting European Standards In Accordance With The Pn-En 1176, Pn-En 1177 Standards Issued By A Certification Body Accredited By The Polish Center For Accreditation (Pca) Or An Equivalent Entity, Confirming The Compliance Of The Proposed Playground Equipment With The Relevant Polish Or European Standards. The Certificate Must Be Valid And Compatible With The Proposed Device. If The Certificate Is Submitted In A Foreign Lang