Request For Quotation Other Products For The Cyclotron Production Complex

Plastic Bends D 20 Mm, No Less Than 90 Degrees, Pp, Color - Gray, Plumbing Investment Flax Is A Classic Sealing Material Made From Natural Combed Fiber, Valve For Pressure Gauge, Diameter No Less Than 15Mm, 14M1-16, Plastic Plumbing Adapter D-No Less Than 20, With Internal Thread, Material - Pp, Color - Gray, Ball Valves With A Diameter Of At Least 15 Mm, Material - Plastic, Plastic Bends D 20 Mm D 20 Mm. Not Less Than 45 Degrees, Pp, Color - Gray, Leaf Paronitis. Asbestos Gasket Material Is Used To Seal Flange And Other Detachable Connections Under Conditions Of Exposure To Aggressive Environments, High Temperatures And Pressure. Permissible Operating Temperature, °C -50/+490. Medium Pressure, Mpa 2 - 10. Compressibility At A Pressure Of 35-50 Mpa, % 5 - 16. Density, G/Cm³ 1.5 - 2.0. In Sheets 1*1.5 M, Thickness From 2, 3, 4 Mm., Plastic Plumbing Adapter D-No Less Than 25, With Internal Thread, Material - Pp, Color - Gray, Plastic Tee D Not Less Than 25 Mm, Material - Pp, Color - Gray, Plastic Bends D 25 Mm, No Less Than 90 Degrees, Pp, Color - Gray, Mixershower Mixer With A Short Jib, Chrome Color, Hard Water Supply, Installation Type: Wall-Mounted, Single Lever (Joystick), Rubber Oil And Petrol Resistant Technical Plate. Thickness: No Less Than 1.5 And No More Than 2.5 Mm. Class: 2 – Working Pressure Up To 0.1 Mpa. Hardness Degree: C – Average Width Not Less Than 1000 Mm, Length Not Less Than 1000 Mm, Smooth Surface Without Potholes Or Sagging, Siphon Ø32 With Grid A410 Siphon For Washbasin With A Diameter Of At Least 32Mm With A Stainless Grid With A Diameter Of At Least 63Mm. The Water Seal Is At Least 58Mm., Plastic Water Pipe With A Diameter Of At Least 20 Mm, Plastic., Plastic Sewer Bends D 50 Mm, Not Less Than 90 Degrees, Material - Pp, Color - Gray, Repair Kit For Toilet Fittings. Inlet Valve/Flush Valve For Grohe Installation, Check Valve For Drains. Valves For Daily Silicone 40Mm/50Mm. Hole Diameter (Mm): 40.0 Drain Type: Drain Hole Main Material: Abs Plastic Installation Type: Built-In Drain Direction: Vertical Shutter Type: Dry, Faucetsurgical Basin Faucet (Elbow), Single Lever, Material: Brass, Color: Chrome, Pressure Gauge Mp-100, For Measuring Pressure, Plastic Bends D 25 Mm. Not Less Than 45 Degrees, Pp, Color - Gray