Request For Quotation Installation Of A Mortise Lock With The “Anti-Panic” System (Quantity 3 Pcs)

Anti-Panic Installation Services: 3 Pieces (3 Doors). Please Carefully Read The Customer’S Technical Specifications. Please Contact The Customer For Clarification. The Installation Must Be Carried Out In Strict Accordance With Sp Rk 2.02-102-2014 “Escape Routes And Exits” And Gost 31471-2011 “Device For Emergency Opening Of Doors Of Evacuation And Emergency Exits” And Gost 5089-2003 (General Technical Specifications For Locks). The Main Requirement Is Emergency Opening Of An Emergency Exit With One Hand Pressed On The Bar From The Inside Without Using Key Fire Resistance Class: For Escape Doors, The Lock And Anti-Panic Handle Must Be Made Of Heat-Resistant Materials (Steel) That Can Withstand Heating Of At Least 200°C Without Melting. Body And Crossbar Material: Galvanized Or Stainless Steel. Door Side: The Lock Must Be Reversible (Universal) Or Have The Ability To Quickly Flip The Latch For Left/Right Opening. Stem Configuration: A Rod (Square) With A Cross-Section Of 9×9 Mm Is Used With A Separation Function (Composite Square) So That The Handle Outside And Inside Work Independently. Opening Force: When Pressing The Control Element (Bar) In The Evacuation Direction, The Force Should Be No More Than 70 N. Response Time: The Device Should Move From The Locked Position To The Open Position Instantly (Within A Second) Without Jamming. Materials: For Fire Doors, All Lock Elements Must Be Made Of Steel Or Refractory Materials. The Use Of Aluminum Or Plastic In Critical Components Is Not Permitted. Marking The Web: Determining The Installation Height Of The Pressure Rod. According To The Requirements, It Should Be Located At A Height Of 900 Mm To 1100 Mm From The Finished Floor Level. Cutting Grooves And Holes: Drilling And Milling A Seat (Pocket) At The End Of The Door For A Mortise Lock Body. Housing Installation: Installation And Fixation Of The Lock In The Door Leaf With Screws.