Request For Quotation Purchasing Consumables

Bolt M12×75 Complete With Nut, Locker And 2 Flat Washers). Characteristics: Bolt - The Nominal Diameter Of The Metric Thread Is 12 Mm, The Thread Pitch Is Large (1.75 Mm), The Length Of The Bolt Shaft Excluding The Head Is 75 Mm. The Hex Head Size Is 19 Mm. The Strength Class Of The Bolt Must Be At Least 8.8 (For Increased Loads). The Nut And Screwdriver - Hex M12 Is Supplied In Accordance With Gost 5915-70 (Din 934) With A Similar Thread Pitch Of 1.75 Mm, A Wrench Size Of 19 Mm And A Corresponding Strength Class (Not Less Than 8). To Prevent The Unit From Self-Unscrewing Under The Influence Of Vibration And Dynamic Loads, The Kit Includes A Spring Washer (Grower) With A Nominal Diameter Of 12 Mm. Flat Washer - 2 (Two) Flat Washers With A Nominal Diameter Of 12 Mm In Accordance With Gost 11371-78 (Din 125) With A Hardness Of At Least 140 Hv And A Thickness Of 2.5 Mm. Compliance With Gost 7798-70 (Din 933). The Guarantee From The Moment Of Signing The Act On The Portal Is 6 Months.