Request For Quotation Metal Products And Fastening Materials

Self-Supporting Insulated Wire Without A Supporting Element, With Aluminum Conductors, With Insulation Made Of Light-Stabilized Thermoplastic Polyethylene, For Overhead Power Lines, With Lighting Conductor, Grade Sip-4 2X16-0.6/1.0, Rated Voltage 0.6/1 Kv, Core Cross-Section 2×16 Mm², Meets The Requirements Of St Rk 2794-2015, New, Undamaged, Supplied In Original Packaging, Strut For Fastening The Traverses Of Overhead Power Line Supports, Type Pt, Metal, Manufactured In Accordance With Gost R 51177-2017, Designed To Strengthen And Fix The Traverses To The Support Posts, Made Of Steel With Anti-Corrosion Coating (Hot-Dip Galvanized), Equipped With The Necessary Fasteners, Resistant To Mechanical Loads And Environmental Influences, Vibrated Reinforced Concrete Stand For Supports Of High-Voltage Power Lines, Brand Sv95-3, Made In Accordance With St Rk 2387-2013, From Heavy Concrete Not Lower Than Class B30, With Prestressed Reinforcement, Frost Resistance Not Lower Than F200, Water Resistance Not Lower Than W6, Length 9.5 M, New, Without Cracks Or Damage, Meeting The Requirements Of The Current Standard, Installation Pins For Fastening Overhead Power Line Fittings, Manufactured In Accordance With Gost R 51177-2017, Are Intended For Installation And Fastening Of Cross-Arms, Insulators And Elements Of Overhead Line Supports, Material - Steel, Coating - Hot-Dip Galvanized For Corrosion Protection, Resistant To Mechanical Loads And Environmental Influences, Delivery Set According To The Application, New, Without Damage, Steel Bandage Fastening Tape C201, Stainless Steel, Dimensions 20×0.7 Mm, Length In Cassette 50 M, Intended For Fastening Cable Fittings, Brackets And Elements Of Overhead Communication And Power Supply Lines On Supports, Used In Conjunction With Clamps (Locks), Resistant To Corrosion And Environmental Influences, New, Without Damage, Anchor Clamp For Fastening Self-Supporting Insulated Wire (Sip-4) Type Rpa 450/120 Or Equivalent, For Wires With A Cross-Section Of 4×50–4×120 Mm², Minimum Breaking Load Of At Least 40 Kn, Body Made Of Hot-Dip Galvanized Steel, Wedges Made Of Weather- And Uv-Resistant Polymer Material, Resistance To Corrosion And Environmental Influences, Operating Temperature Not Higher Range From -60 °C To +50 °C, Compliance With Current Standards., Vibrated Reinforced Concrete Stand For Supports Of High-Voltage Power Lines, Brand Sv105-5, Made In Accordance With St Rk 2387-2013, From Heavy Concrete Of Class Not Lower Than B30, With Prestressed Reinforcement, Frost Resistance Not Lower Than F200, Water Resistance Not Lower Than W6, Length 10.5 M, New, Without Cracks, Chips And Other Defects, Meeting The Requirements Of The Current Standard, Steel Wire, Heat-Treated, Galvanized, Diameter 2.5 Mm, Manufactured In Accordance With Gost 3282-74, Intended For Fastening, Installation And Construction Work, Uniform Zinc Coating, Surface Without Cracks, Delaminations And Damage, Tensile Strength And Weight Of Zinc Coating In Accordance With Gost Requirements, Delivery In Coils, New, In Original Packaging, Complete Construction Bolt With Nut And Washer, Manufactured In Accordance With Gost Iso 8992-2015, Strength Class Not Lower Than 8.8, Material - Carbon Steel, Coating - Galvanized Anti-Corrosion, Metric Thread, Delivery Set: Bolt, Nut, Washer, Intended For Connecting Metal Structures, Supports And Building Elements, New, Without Mechanical Damage, Dimensions According To The Customers Request, Photo Relay Photocell Switch Mh-600 Or Equivalent, Designed For Automatically Turning On And Off Lighting Depending On The Level Of Illumination, Rated Voltage 220–240 V, Frequency 50/60 Hz, Rated Current 6 A, Degree Of Protection Not Lower Than Ip44, Response Threshold 5–15 Lux, Operating Temperature Range Not Less Than -25 °C To +40 °C, Case Material - Shockproof Uv-Resistant Plastic, For Outdoor Installation, Meets The Requirements Of Current Standards., A Kit For Mounting Luminaires, Designed For Reliable Fastening Of Luminaires To A Ceiling, Wall Or Support, Complete With Fastening Elements (Bracket, Mounting Plate Or Plate, Screws, Bolts, Nuts, Washers, Dowels/Anchors - Depending On The Type Of Installation), Fastening Material - Galvanized Steel Or Equivalent With Anti-Corrosion Coating, The Kit Is Compatible With The Installed Luminaires, New, Meeting The Requirements Of Current Standards. Agree With The Customer