Request For Quotation Purchase Of Electrical Goods

A Set Of 100 Universal Marking Tags Is Designed For Identification, Marking And Accounting Of Cables, Wires, Equipment And Elements Of Electrical Installations. Tags Must Be Made Of Plastic Or A Combined Paper-Plastic Material, Provide The Ability To Print Alphanumeric Information, Be Resistant To Operation, Convenient For Installation And Maintenance, A Four-Layer Non-Sterile Medical Gauze Mask Is Made Of Bleached Gauze Of Simple Weave And Is Equipped With Ties For Fixing On The Head; Designed To Filter Inhaled And Exhaled Particles, As Well As Protect Against Viruses And Bacteria In The Air, A Universal Thermostat (Thermostat) On A Din Rail, Non-Programmable, With A Digital Lcd Display, Designed For Automatic Control Of Cable Heating In Heated Floors, Water Floors, Anti-Icing Systems, Boilers, Heaters And Boilers; Is Installed In The Electrical Panel On A Standard Din Rail And Controls The Temperature Through A Complete 5-Meter Temperature Sensor, Supporting An Operating Range From –45°C To +115°C; Executive Relay - “Dry” Normally Open Contact 16A, 250V Ac, An Analog Measuring Instrument For Determining Indoor Air Temperature, Made With A Dial And A Dial Scale (Usually In Degrees Celsius), Distribution Board. Construction Mounting Housing For Installation Of Modular Electrical Devices And Devices (Circuit Breakers, Rcds, Automatic Devices, Timers, Relays) In Open Electrical Installations, Made Of Impact-Resistant Self-Extinguishing Abs Plastic With Wall-Hung Mounting Type, Combination Wrench Set With Ratchet Mechanism And Swivel Joint Made Of Heat Treated Chrome Vanadium Steel. For Tightening And Loosening Nuts And Bolts Of Various Sizes. The Set Must Contain At Least 10 Keys Of Sizes 6, 7, 8, 9, 10, 11, 12, 13, 17 And 22 Mm, Mounted Distribution Board For Installing Modular Electrical Equipment And Performing Functions Of Distribution And Protection Of Electrical Circuits Indoors; The Design Provides 1 Horizontal Row Of 12 Standard Modules 18 Mm Wide With The Ability To Install Any Modular Equipment; The Body Is Made Of Self-Extinguishing Plastic, Circulation Pump For Heating Systems With A Wet Rotor. Power Supply - 230 V, 50 Hz. Three-Stage Power Regulation, Power Consumption - No More Than 90 W. The Degree Of Protection Is Not Lower Than Ip44, The Insulation Class Is Not Lower Than F. Operating Pressure Is Not Less Than 10 Bar, The Maximum Coolant Temperature Is Not Lower Than 110 °C. Maximum Pressure - No Less Than 6 M, Productivity - No Less Than 3.5 M³/H. The Connection Is Threaded, The Body Is Cast Iron., This 19-Piece Set Of 5% Cobalt Metal Drill Bits Is Designed For Drilling A Variety Of Metal Materials, Including Stainless Steel, Ferrous And Non-Ferrous Metals, And Other Hard Surfaces. The Diameters Of The Drills In The Set Vary From 1.0 Mm To 10 Mm. Drills Made Of High Speed Steel Hss-Co (5% Co), Cordless Blower With Cordless 18V Battery Power, No Battery Or Charger Required, Set Of L-Shaped Hex Keys Made Of Durable Chrome Vanadium Steel. For Tightening And Unscrewing Bolts And Hexagon Socket Screws. The Set Includes At Least 9 Keys Of Various Sizes, Heat Shrink Tube Set, Wall-Mounted Outdoor Floodlight, With A Cast Aluminum Body, Designed For Outdoor Lighting Of Areas, Facades And Open Spaces, Designed For One Metal Halide Lamp With A Power Of 70 W, A Set Of 100 Self-Tapping Screws For Fastening To Metal Profiles Is Intended For Installation Work During The Construction Of Partitions And Suspended Structures Made Of Plasterboard. Self-Tapping Screws With A Diameter Of 3.5 Mm, A Length Of 25 Mm, Black Coating, With A Sharp Tip And Thread Along The Entire Length For Quick Entry Into Metal Up To 1.0 Mm Thick Without Pre-Drilling.