Request For Quotation Purchase Of Medical Products

Femoral Leg. Material: Titanium Alloy, Hydroxyapatite. Shape: Wedge-Shaped In 2 Planes, Without A Limiting Collar, With Two Longitudinal Decompression Grooves On The Sides, Without Transverse Ribs And Protrusions. The Neck Is Polished. The End Of The Distal Part Has A Truncated Shape On The Lateral Side In The Frontal Plane. Type Of Fixation: Primary Fixation - Press Fit. Secondary - Osseointegration. Coating: Plasma Titanium Sputtering In Combination With A Fine Hydroxyapatite Coating, 50 Micrometers Thick, Applied Circularly Only In The Proximal Part Of The Stem. Standard Sizes: 12 Standard Sizes. The Offset For A Component With A 127-Degree Neck-Shaft Angle Ranges From 32 Mm To 58 Mm, Increasing In Proportion To The Size Of The Component. Leg Length Ranges From 93 Mm To 126 Mm Depending On The Standard Size. Neck Length: Range From 27 Mm To 40 Mm Depending On The Size. Cervical-Shaft Angle (Angle Between The Neck And The Axis Of The Stem): 127 Degrees. Cone: 11/13., The Cup Is Acetabular. Material: Titanium Alloy, Hydroxyapatite. Shape: Hemispherical. The Pole Has A Threaded Hole For Fixing The Impactor. In The Equatorial Part Of The Inner Surface There Is A Circular Groove For Fixing The Liner Without An Additional Metal Locking Ring. Coating: Rough Titanium Coating Applied By Plasma Spraying With An Additional 50 Micrometer Thick Hydroxyapatite Surface Coating. Type Of Fixation: Primary Cementless Fixation Using The Press-Fit Type With The Possibility Of Additional Fixation With Cancellous Screws For Options That Include Holes For Screw Fixation. Secondary Fixation Due To Osseointegration. Standard Sizes: 17 Standard Sizes Ranging From 42 Mm To 72 Mm In Increments Of 2 Mm. Options: Sector 3 Holes, Sector 5 Holes, Evenly Distributed 8-12 Holes, Femoral Head. Material: Cobalt-Chrome Alloy. Diameter: 22.2; 26; 28; 32; 36 Mm. Offset: For Diameter 28 Mm: -4, 0, +4, +6, +8, +12. Taper: 11/13, Insert. Ultra-High Molecular Weight Polyethylene With A Large Number Of Cross-Links. Shape: Hemispherical, Along The Equator The Liner Has Circular Protrusions For Fixation In The Cup And 12 Grooves Along The Periphery For Matching With The Derotational Protrusions Of The Cup. Fixation Mechanism: By Impact Wedging The Circular Protrusion Of The Liner Into The Corresponding Circular Groove Of The Cup, Without An Additional Metal Locking Ring. Standard Sizes: Inner Diameter: 28 Mm, 32 Mm. An Insert With An Internal Diameter Of 32 Mm Is Available For Installation In An Acetabular Component Whose Outer Diameter Starts From 44 Mm. Options: Standard, With 10 Degree Visor