Tenders Are Invited For Replacing The Artificial Surface On The Multi-Purpose Sports Field At Szs In Bobrek

The Subject Of The Order Is The Performance Of Construction Works As Part Of The Task Entitled: Replacement Of The Artificial Surface On The Multi-Purpose Sports Field At The Szs In Bobrek. Investment Location: Local Government School Complex In Bobrek, Ul. Nadwiślańska 9, Plot No. 183/16, Bobrek District, Unit Evid.: 121303_5 Chełmek - Rural Area Scope Of Investment List Of Characteristic Parameters For The Designed Facility: Length Of The Facility: 22.50 M, Width Of The Facility: 44.00 M, Area Of ​​The Reconstructed Surface: 990.00 M², Base Layer Sbr Min. 11 Mm, Epdm Spray Min. 2 - 3 Mm. Scope Of Works: 1. Demolition Works: Dismantle The Existing Goals And Secure The Existing Basketball Backboard Structures. Remove The Existing Synthetic Surface And Take It To An Appropriate Landfill Or Recycle.2. Delivery And Installation: A) An Information Board With Dimensions Of 100 Cm X 70 Cm Placed On Two Galvanized Steel Posts At A Height Of 220 Cm Above The Ground, Counting From The Lower Edge Of The Board, Made Of Galvanized Steel Sheet With A Double-Rolled Edge, Printed Foil Glued On It, And Then Uv Foil Glued On It (Its Final Visualization Will Be Agreed Upon When Developing The Graphic Design Of The Board).3. Epdm Surface: Synthetic Surface Dedicated To Outdoor Multi-Purpose Sports Fields. The Surface Is Intended For Laying On A Base Of Cavernous Concrete. Use Only System Solutions Dedicated To Outdoor Pitches. Carry Out Everything Strictly In Accordance With The System Manufacturers Specifications.4. General Requirements After Removing And Disposing Of The Old Surface, Any Damage To The Cavernous Concrete Must Be Leveled And Repaired. Repair Damage With Cavernous Concrete Using Bonding Layers. Clean The Surface With Compressed Air And Protect The Existing Edge Of The Pitch. Remove All Loose Substructure Elements. The Surrounding Area Should Be Carefully Taped And Protected Against Dirt During Paving Works. Use Dedicated Bonding Layers (Primer). Use A Paver To Lay A Base Layer Of Sbr With A Thickness Of Min. 11Mm. Strictly Follow The Installation Regime (Permissible Temperatures, Humidity, Technological Breaks And Others Resulting From The Manufacturers Requirements). Do Not Lay Before Expected Rainfall. It Is Recommended That The Layers Be Joined With An Offset. Use Epdm Spray Min. (2X) 2-3 Mm In Red. The Detailed Scope Of The Subject Of The Order Is Included In The Attached Design Documentation. Scope Of The Study In Accordance With Art. 29 Section 4. Point 1 Letter B) Regarding The Reconstruction Of The Facility In Accordance With Art. 29 Section 1. Point 20 Of The Construction Law Does Not Require A Building Permit Or Notification. Information Regarding The Order. As Part Of The Task And The Offered Price, The Contractor Is Primarily Obliged To:1. Securing The Site Of Construction Works, Collecting Materials And Waste Generated During The Work Against Access By Unauthorized Persons.2. Securing The Pitch Equipment Elements During Work Related To