Tenders Are Invited For Reconstruction Of Municipal Road No. 107125L In Żabia Wola On The Section From Km 2+304 To Km 3+303

The Subject Of The Order Is The Performance Of Construction Works: Reconstruction Of Municipal Road No. 107125L In Żabia Wola On The Section From Km 2+304 To Km 3+303. The Following Works Are To Be Performed: 1) Preparatory Works, 2) Demolition Works 3) Earthworks 4) Foundation: Mechanical Profiling And Compaction Of The Subsoil For Construction Layers, Frost Protection Layer Made Of A Mixture Of Cement-Bonded Aggregate C5/6, Thickness. 20 Cm, Upper Foundation Layer Made Of Mechanically Stabilized Crushed Aggregate 0/31.5 Mm, Thickness. 20 Cm,5) Surface: Sprinkling The Aggregate Surface With Asphalt Emulsion, Making The Surface Of Asphalt Concrete, Binding Layer Ac 16W 50/70 Kr 2 Gr. 5 Cm, Sprinkling The Binding Layer With Asphalt Emulsion, Making An Asphalt Concrete Surface: Wearing Course Ac 11S 50/70 Kr 2 Gr. 4 Cm, Sprinkling The Edges Of The Surface With Asphalt, 6) Strengthening The Ditch Slopes With Prefabricated Openwork Slabs 40X60x8cm On A Cement-Sand Ballast 1:4 Gr. 10 Cm Along With Filling The Holes With Native Soil And Profiling The Counterslope And The Bottom Of The Ditch,7) Ramps And Replacement Of Culverts8) Finishing Works - Planting The Slopes Of The Excavations, Hardening The Roadsides With Aggregate Mixtures With A Grain Size Of 0/31.5 Mm Thick. 8 Cm After Compaction9) Horizontal Road Marking With Chemically Hardened Materials - Continuous Edge Line, Interrupted At Exits10) Vertical Marking - 2 New Sets: Posts Made Of Galvanized Pipes, Dia. 60 Mm – 2 Pcs., Sign Shields – 3 Pcs.: 2Nd Generation Reflective Foil, Size – Small. The Following Signs Can Be Set: A) A-30 + T-1 [End Of Paved Surface] – 1 Set. (2 Discs + Post)B) B-33 (40Km/H) - 1 Set. (Shield + Post) The Detailed Scope, Requirements And Conditions For The Execution Of The Works Covered By The Subject Order Are Specified In The Technical Design, Bill Of Quantities And Technical Specifications For The Execution And Acceptance Of Construction Works, Constituting Annexes To This Swz. The Contractors Obligations Under The Task And The Offer Price Include: 1) Execution Of The Subject Of The Contract In Accordance With The Design Documentation, Construction Practice And Principles Of Technical Knowledge, Applicable Standards And Construction Law, On The Terms And Conditions Set Out In This Contract And With Due Care And Within The Contractual Deadlines; 2) The Contractor Is Responsible For Full Control Of The Works And The Quality Of The Incorporated Materials. The Contractor Will Provide An Appropriate Control System, Including Personnel, Laboratory, Equipment, Supplies And All Devices Necessary For Sampling And Testing Materials And Works; 3) Submitting, Before Signing The Contract, A Copy Of The Construction Managers Qualifications In The Road Specialty Or Corresponding Equivalent Construction Authorizations Issued On The Basis Of Previously Applicable Regulations, And In The Case Of Foreign Contractors - Construction Management Authorizations Equivalent To Those Indicated A