Tenders Are Invited For Miscellaneous Medical Devices And Products - Supply Of Patient Immobilization Devices

Miscellaneous Medical Devices And Products - Supply Of Patient Immobilization Devices. The Subject Of The Public Procurement Includes The Selection Of A Contractor For A One-Time Supply Of Patient Immobilization Devices Compatible With The Available Equipment, Namely: 6D Couch On The Varian Truebeam Edge Accelerator, Patient Table On The Varian Clinac Ix Accelerator, Siemens Somatom Definiton As Computer Tomograph And Accuray Tomotherapy Hda Helical Tomotherapy Device, As Follows: 1. Fiber-Carbon Base Pad Allowing Attachment Of Head And Head Immobilization Pads And Masks And Shoulders, For Use With Thermoplastic Push-Pin Masks. The Pad Is Compatible With The 6D Couch On The Varian Truebeam Edge Accelerator, The Patient Table On The Varian Clinac Ix Accelerator, The Siemens Somatom Definiton As Computer Tomograph And The Accuray Tomotherapy Hda Helical Tomotherapy Device. By Means Of A Locating Bar To Have A Rectangular Insert For Head Pads - Number - 3 2. A Complete Set Of Head Pads With Different Curves For Immobilizing The Head In The Back Position And In The Face Position, Compatible With A Base Pad For Push-Pin Type Masks. The Pads Must Be Made Of Foam And Have A Rectangular Base For Attachment - Set - 3 3. A Set Of Blocks And Wedges For Changing The Height And Inclination Of The Pads From Point 2, They Must Be Rectangular For Gluing To The Base Pad For The Head And Neck - Set - 3 4. A Wedge For Positioning During Chest Radiation With Armrests And The Possibility Of Changing The Inclination. The Wedge Must Be Made Of Foam - Number - 3 4.1 Lifting Wedges At 5° And 10° To Allow Combination For Lifting At 15°. 4.2 System For Positioning The Hands Above The Patients Head Including Grip Handles Allowing Movement In Different Positions 5. System For Immobilization During Irradiation Of Volumes In The Thorax Area (So-Called Wing Board Type) With An Available Option For Positioning The Hands Above The Patients Head With Grip Handles Allowing Movement In Different Positions - Number - 3 6. System For Positioning The Knees And Feet, Made Of Foam Containing: - Number - 3 6.1 Wedge For Fixation Of Knees 6.2 Fixator For Feet 7. Bolus Of Jelly Gel 7.1 30X30x 5 Mm. Without Packaging - Quantity - 5 7.2 30X30x 5 Mm. With Packaging - Quantity - 5 7.3 30X30x10 Mm. Without Packaging - Quantity - 5 7.4 30X30x10 Mm. With Packaging - Number -- 5 8. Thermostatic Bath For Thermoplastic Masks; Minimum Internal Dimensions Of The Work Bath (Length X Width) -660Mm X 550Mm - Number -1 9. Thermoplastic Masks 9.1 Microperforated Thermoplastic Immobilization Head Mask With 3 Point Attachment For Single Use, Compatible With Push-Pin Type Base Pad - Number - 50 9.2 Microperforated Thermoplastic Immobilization Mask For Head, Neck And Shoulders With 5 Point Attachment For Single Use, Compatible Push-Pin Type Base Pad - Number - 250 9.3 Microperforated Thermoplastic Ph-Reinforced Immobilization Mask For Head, Neck And Shoulders Type Open Face With 3 Point Attachment, Single Use, Compatible Push-Pin Type Base Pad - Number - 50 9.4 М