Tenders Are Invited For Carpentry Installation Work – Energetic Renovation Of The Kleinenbremen Visitor Mine And Museum - Carpentry And Wood Construction Work

Carpentry Installation Work – Energetic Renovation Of The Kleinenbremen Visitor Mine And Museum - Carpentry And Wood Construction Work. The Minden-Lübbecke District Will Convert The Kleinenbremen Visitor Mine And Museum (Bbmk) And Modernize Its Energy Efficiency In Order To Bring The Object Up To The Latest Technical Standards. The Bbmk Is The Only Authentically Preserved Iron Ore Mine And Museum In The Westphalia Region. The Buildings On The Property In Question Were Built Between 1935 And 1938. Since 1988, The Buildings Have Served As A Museum With An Attached Workshop As Well As Storage And Exhibition Areas. A Pollutant Report Was Prepared. This Must Be Taken Into Account During The Work. The Service Of This Tender Includes All Work Required For Carpentry And Wood Construction Work. When Disposing Of All Demolition And Dismantling Materials, The Transport Routes From The Removal Site To The Entrances And Exits For Disposal Must Be Taken Into Account. Work And Storage Areas: Work And Storage Areas As Well As Areas For Construction Site Facilities Are Provided Outside. Parking Spaces: There Is A Large Visitor Parking Lot Adjacent To The Museum, Some Of Which Is Reserved For Construction Site Vehicles. Construction Electricity: Construction Electricity Supply Is Provided Externally By The Building Owner Via A Specialist Company. Once All Work Has Been Completed, The Entire Renovation Area Must Be Carefully Swept And Left Clean. All Areas Required For The Direct Construction Site Must Be Prepared By The Contractor At His Own Expense. The Areas Must Be Agreed With The Client And The Construction Management And Left Clean Again After The Work Has Been Completed. Rough Mass For Publication: 3 Pieces. Supply And Install Attic Stairs Approx. 900 M² Vapor Barrier On The Top Floor Ceiling Approx. 900 M² Insulation On The Top Floor Ceiling Supply And Install Approx. 830 M² Chipboard As A Cover Supply And Install Approx. 335 M² Dry Screed Supply And Install Approx. D=30 Cm Deliver And Install.