Request For Quotation Purchase Of Plumbing Materials (Water Supply Pipes)

Plastic Pipe Dn40 Ppr (Polypropylene) Pipe Reinforced With Glass Fiber (Pn20 Type) Is Three-Layer Pipe Designed For Hot Water Supply, Cold Water Supply And Heating Systems. Thanks To Glass Fiber Reinforcement, It Has A Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, Withstands Operating Pressure Up To 20 Bar And Temperature Up To +70-90°C Gost 32415-2013, Pvc-U (Pvc-U) Pressure Pipe (Not Plasticized Polyvinyl Chloride) With Adhesive Connection. Dn 63 Cormell Pvc Pressure Pipe D63×2.7 Pn6.3* L=3 M With Socket For Adhesive Joint (Meter) Wall Thickness: Approximately 2.7 Mm. Pipe Length: 3M Length. Type Of Connection: Pressure, Adhesive Or Socket Connection Is Assumed. Scope Of Application: Pressure Feed Systems. Gost 32415-2013, Plastic Pipe Du25 Ppr (Polypropylene) Pipe Reinforced With Glass Fiber (Pn20 Type) Is Three-Layer Pipe Designed For Hot Water Supply Systems, Cold Water Supply And Heating. Thanks To Glass Fiber Reinforcement, It Has Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, Withstands Operating Pressure Up To 20 Bar And Temperature Up To +70-90°C. Gost 32415-2013, Pvc Pipe No. 50 The Pipe Is Intended For Installation Of Internal Non-Pressure (Gravity) Systems Sewerage And Drainage. Outer Diameter: 50 Mm. Inner Diameter: About 46.4Mm. Wall Thickness: 1.8 Mm (Nominal According To Gost/En For Standard Series). Hardness Class: For Indoor Use (Class “B”, Not Intended For Ground Loads). Laying Depth: Not Applicable For Laying In The Ground (Installation On Walls, Ceilings, In Grooves Or Boxes). Operating Temperature: Up To +60°C (Short-Term Up To +95°C). Connection Type: Flare With Rubber Sealing Ring. Gost 32412-2013, Plastic Pipe Dn50 Ppr (Polypropylene) Pipe Reinforced With Glass Fiber (Pn20 Type) Is Three-Layer Pipe Designed For Hot Water Supply, Cold Water Supply And Heating Systems. Thanks To Glass Fiber Reinforcement, It Has A Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, Withstands Operating Pressure Up To 20 Bar And Temperature Up To +70-90°C Gost 32415-2013, Plastic Pipe Du20 Ppr (Polypropylene) Pipe Reinforced With Glass Fiber (Pn20 Type) Is Three-Layer Pipe Designed For Hot Water Supply Systems, Cold Water Supply And Heating. Thanks To Glass Fiber Reinforcement, It Has Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, Withstands Operating Pressure Up To 20 Bar And Temperature Up To +70-90°C. Gost 32415-2013, Pvc-U (Pvc-U) Pressure Pipe (Not Plasticized Polyvinyl Chloride) With Adhesive Connection. Dn 50 Pressure Pipe Cormell Pvc D50×2.7 Pn6.3* L=3 M With Socket For Adhesive Connection (Meter) Wall Thickness: Approximately 2.7 Mm. Pipe Length: 3M Length. Type Of Connection: Pressure, Adhesive Or Socket Connection Is Assumed. Scope Of Application: Pressure Feed Systems. Gost 32415-2013, Plastic Pipe Du32 Ppr (Polypropylene) Pipe Reinforced With Glass Fiber (Pn20 Type) Is Three-Layer Pipe Designed For Hot Water Supply, Cold Water Supply And Heating Systems. Thanks To Glass Fiber Reinforcement, It Has A Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, Withstands Operating Pressure Up To 20 Bar And Temperature Up To +70-90°C Gost 32415-2013