Request For Quotation Purchase Of Building Materials

Polypropylene Single Clip (Support) For Pipes D=20 Mm. • Gost 32415-2013. Single Polypropylene Support (Clip) For Fastening Plastic Pipelines To Building Structures. Rigid And Movable Fixation Of Polypropylene Pipes To Walls, Floors Or Ceilings While Maintaining The Possibility Of Axial Thermal Expansion Of The Pipe. • Single U-Shaped Design With A Snap Lock. • The Presence Of Side Grooves (Fastenings) For The Possibility Of Joining Several Clips Into A Single Block (For Parallel Laying Of Hot Water And Hot Water Pipes). • The Presence Of A Central Hole In The Base For A Dowel-Nail For Mounting To The Wall. Impact-Resistant And Heat-Resistant Polypropylene (Ppr)., Metal Self-Tapping Screws For Fastening Profiles (In Everyday Life - “Seeds” / “Bugs”). Gost 11650-80. Piercing Screw (Self-Tapping Screw) / With A Drill For Thin-Sheet Metal Profiles. Mutual Fastening Of Metal Profiles (Ps And Pn), As Well As Fixation Of Direct Hangers (“Directorates”) To The Frame. With A Drill (Drill) - For Easy Drilling Of Reinforced Metal Up To 2.0 Mm Thick (0.6 Mm Profiles + 0.9 Mm Hanger). 3.5 × 9.5 Mm Or 3.5 × 11 Mm (The Most Popular And Compact Size, So That The Head Does Not Interfere With Twisting The Drywall Later)., Polypropylene Ball Valve (Ppr / Ppr). Ball Valve Made Of Polypropylene Random Copolymer (Ppr) For Water Supply Systems. • Gost 32415-2013. Complete Shutdown And Regulation Of The Flow Of Cold Or Hot Water On Main Lines And Input Points To Plumbing Fixtures. 20 Mm Or 25 Mm (Must Strictly Correspond To The Outer Diameter Of The Purchased Ppr Pipes). • Connection Type: Socket Welding (Solder). • Shutter Type: Highly Polished Chrome-Plated Brass Ball. • Handle Shape: “Butterfly” Or Long Lever Made Of Impact-Resistant Plastic. Ppr Polypropylene, Identical To The Pipe Material, To Ensure A Reliable One-Piece Weld. • Nominal Pressure: Pn20 Or Pn25 (Up To 25 Bar). • Operating Temperature: Up To +90 °C (Universal For Cold Water And Domestic Hot Water)., Flexible Water Line Included (Pair: Hot/Cold). Flexible Braided Connecting Hoses For Connecting Sanitary Fixtures. • Gost 19681-2016. Non-Toxic Epdm Ethylene Propylene Rubber (Approved For Drinking Water, Does Not Emit Harmful Substances And Odor). Stainless Steel (Aisi 304). The Presence Of Weaving Blue And Red Threads For Visual Identification Of Cold And Hot Water Lines. High Quality Brass (Nickel Plated) With High Corrosion Resistance. Nut – Fitting:• Union Nut With Internal Thread: G 1/2 (From The Water Supply Side).• Screw-In Fitting (Needle): M10 (Short/Long Fitting For Easy Installation Into The Mixer Body). 50 Cm Or 60 Cm (Check At The Installation Site, Standard Universal Size).• Operating Pressure: At Least 10 Bar (1 Mpa).• Maximum Operating Temperature: Up To +90 °C. Set (2 Hoses: With Red And Blue Markings)., Polypropylene Equal-Bore Ppr Tee (Ppr) D=20 Mm. • Gost 32415-2013. Equal Bore Polypropylene Random Copolymer (Ppr) Tee For Pressure Pipelines. Branching Of A Polypropylene Pipeline At An Angle Of 90° In Hot (Dhw) And Cold (Cw) Water Supply Systems. Socket Polyfusion Welding (Thermal Soldering Using A Welding Machine For Ppr Pipes). Stabilized Polypropylene Random Copolymer (Ppr), Providing Homogeneous, Permanent And 100% Hermetic Fusion With The Pipe.• Nominal Pressure: Pn25 (Up To 2.5 Mpa / 25 Bar).• Maximum Operating Temperature: Up To +90 °C (Universal For Cold And Hot Water)., Polypropylene Single Clip (Support) With A Latch For Pipes D=50 Mm. • Gost 32415-2013. • Equipped With A Top Latch (Strap/Lock) That Prevents Heavy Pipe From Accidentally Jumping Out Of The Holder. • Has A Factory-Made Central Hole In The Base For A Dowel-Nail Or Self-Tapping Screw For Fastening To Solid Walls. High-Strength, Rigid Polypropylene (Ppr), Resistant To Temperature Changes And Deformation., Ppr Polypropylene Plug D=20 Mm. • Gost 32415-2013. Permanent Or Temporary Blocking (Silencing) Of Water Flow At The End Sections Of A Polypropylene Pipeline In Cold Water And Hot Water Supply Systems. 20 Mm (The Internal Welding Diameter Of The Socket Must Ideally Correspond To The Outer Diameter Of The Pipes 20 Mm). Stabilized Random Copolymer Polypropylene (Ppr), Ensuring Uniform, Permanent And Hermetic Fusion With The Pipe After Heating. • Nominal Pressure: Pn25 (Up To 2.5 Mpa / 25 Bar).• Maximum Operating Temperature: Up To +90 °C (Universal For Cold And Hot Water)., Corrugated Fan Pipe (Sliding Eccentric/Cuff) For Connecting Toilets To The Sewerage System. Sealed Connection Of The Toilet Outlet With The Inlet Socket Of The Sewer Pipe (Diameter 110 Mm) At Any Angle. • Gost 22689-2014. High Quality Virgin Polypropylene (Plastic) With Built-In Steel Helix (Reinforcement) To Maintain Shape Rigidity. Integrated Multi-Row Rubber (Thermoplastic Elastomer) Seals On Both Ends Of The Corrugation (Skirt), Ensuring Complete Tightness Of The Connection Without The Use Of Sealant. • Inlet Diameter (For Toilet Outlet): From 80 To 110 Mm (Elastic Cuff Fits Any Type Of Childrens Toilet). • Outlet Diameter (Into The Sewer): Strictly 110 Mm. • Length: Sliding (Universal), Approximately From 230–250 Mm (Compressed) To 500–550 Mm (Extended). High Elasticity, Resistance To Hot Water, Household Chemicals And Mechanical Deformation., Elbow (Elbow) Polypropylene 90° Ppr (Ppr) D=20 Mm. Elbow (Bend) 90 Degrees Polypropylene Random Copolymer (Ppr) For Pressure Pipelines. • Gost 32415-2013. Changing The Direction Of Movement Of Connecting Polypropylene Pipes At An Angle Of 90° In Hot And Cold Water Supply Systems. 20 Mm (The Internal Diameter Of The Socket Should Ideally Suit The Soldering Of Pipes With A Diameter Of 20 Mm). Socket Polyfusion Welding (Thermal Soldering Using A Special Apparatus). Stabilized Polypropylene Random Copolymer (Ppr), Providing A Monolithic, Permanent And Hermetic Connection With The Pipe. • Nominal Pressure: Pn25 (Up To 2.5 Mpa / 25 Bar).• Maximum Operating Temperature: Up To +90 °C (Universal For Cold Water And Domestic Hot Water)., Polypropylene Equal Bore Coupling Ppr (Ppr) D=20 Mm. • Gost 32415-2013. Coupling (Straight) Polypropylene Random Copolymer (Ppr) For Pressure Pipelines. Direct Serial Connection Of Two Sections Of Polypropylene Pipes Of The Same Diameter In Hot (Dhw) And Cold (Cw) Water Supply Systems. Socket Polyfusion Welding (Thermal Soldering Using A Welding Machine For Ppr Pipes). Stabilized Polypropylene Random Copolymer (Ppr), Providing A Homogeneous, Permanent And 100% Hermetic Fusion With The Pipe., Double Mixer. Central Onboard Washbasin Mixer, Two-Handle (Two-Valve), Type: Sm-Um-Cd. Supply And Mixing Of Cold And Hot Water In Ceramic Washbasins In Preschool And Public Institutions. • Gost 25809-2019. Dual Valve (Two Separate Rotary Knobs/Handwheels For Independent Adjustment Of Cold And Hot Water Flow). High-Quality Brass (Ls59-1 Or Equivalent) With Durable Multi-Layer Protective And Decorative Chrome Or Nickel-Chrome Coating. (The Use Of Cheap Silumin Is Not Allowed Due To Its Fragility). Ceramic Valve Axle Boxes (Rotation Angle 90° Or 180°) Or Wear-Resistant Rubber Gaskets That Ensure Smooth Operation And Tightness When Closed. A Traditionally Shaped Swivel Spout, Equipped With A Removable Plastic Or Metal Aerator (Stream Straightener) To Create A Soft Stream And Save Water., Combined Transitional Polypropylene Coupling (Ppr) With Internal/External Thread (Adapter) D=20 Mm × 1/2. Soldering: 20 Mm.• Diameter Of Metal Pipe Thread: 1/2 Inch (Agree On The Type Of Thread With The Craftsmen: Bp - Internal Or Hp - External, Depending On The Supply Hoses).• Plastic Part: Polypropylene Random Copolymer (Ppr).• Threaded Insert: High-Quality Nickel-Plated Or Chrome-Plated Brass With Longitudinal Grooves To Prevent Twisting Metal In Plastic During Installation.• Nominal Pressure: Pn25 (Up To 25 Bar).• Maximum Operating Temperature: Up To +90 °C (Universal For Cold Water And Domestic Hot Water)., Expandable Metal Anchor Bolt With Nut (Or Wedge Anchor) For Dense Solid Foundations. • Gost R 57787-2017. Diameter Of The Anchor Element (Sleeve): 8 Mm. Total Length Of The Anchor: 60 Mm (Or 40 Mm As Agreed With The Craftsmen). High Strength Structural Carbon Steel. Coating: Anti-Corrosion Galvanic Plating (White Or Yellow Passivated). The Product Includes A Tapered Head Stud, A Slotted Spacer Sleeve, A Flat Clamp Washer And A Hex Nut.