Tenders Are Invited For Introduction Of Energy-Saving Measures In Accordance With The Predictions Of The Energy Efficiency Survey Of The Edelweiss Dg In The City Of Etropole, Municipality Of Etropole

Within The Scope Of The Public Procurement, It Is Planned To Implement The Following Energy Efficiency Measures: Esm 1 - Thermal Insulation Of The Roof Of The Building: The Measure For The Roof Provides For Delivery And Installation Of Thermal Insulation Material Xps Above The Roof Plate With A Total Area Of 465.35 M2 - Making Reinforced Cement Screed, And Laying Two-Layer Waterproofing. -Thickness Of The Thermal Insulation Material Δ = 0.12M - Thermal Conductivity Coefficient Λ ≤ 0.030W/Mk. Ecm 2 - Thermal Insulation Of The Floor: This Measure Provides For The Thermal Insulation Of The Adjacent Walls Of The Basement Bordering The Outside Air (Plinths), Namely Type 1 Walls With A Total Area Of 135.99M2 With External Thermal Insulation With Xps With A Thickness Of 120Mm And A Thermal Conductivity Coefficient Not Higher Than Λ ≤ 0.030W/Mk. Esm 3 - Measures For Building Installations: A Reconstruction Of The Heating Installation To Work With Floor Fan Convectors Is Planned. After The Installation Of The New Heat Source - Air-Water Chillers, It Will Also Be Able To Serve For Cooling The Building. Esm 4 - Installation Of A Modern Heat Source - Air-Water Chillers: It Is Planned To Install 2 Pcs. - Air-Water Chillers Each With A Cooling Capacity Of 71.3 Kw, Heating Capacity At 65° C Of The Water 82.9 Kw, Electrical Capacity 25.5 Kw. Their Advantage Is That If A Photovoltaic System Is Installed On The Roof Of The Building To Produce Electrical Energy For Its Own Needs, Supplying It With Electrical Energy Will Save A Large Amount Of Primary Energy And Will Serve For Heating, Dhw And Cooling The Building During The Summer Period. Esm 5 - Delivery And Installation Of Instruments For Measurement, Control And Management: To Regulate The Temperature Of The Supply Water To The Heating Installation, Depending On The Outside Air Temperature And The Temperature In A Room Characteristic Of The Building, A Control System Will Be Installed Using A Three-Way Im Regulator. Ecm 6 - Improving The Efficiency Of The Dhw System: To Increase The Efficiency Of The System, It Is Planned To Connect The Dhw System To The Chillers. Ecm 7 - Lighting Measures: The Measure Includes The Development Of An Investment Project By A Designer With The Appropriate Qualification For Replacing The Lighting Installation. To Pledge Replacement Of 180 Pieces Of 60W Lpg With Led Lighting Fixtures 6W, 72 Pieces. Fluorescent Lamps 36W With Led Lamps 18W, Including Installation Replacement. Esm 8 - Res Measures - Installation Of A Photovoltaic Plant: Construction Of The Photovoltaic Plant With A Total Power Of 28.80Kwp, Located On The Roof Of The Building. A Detailed Description Of All Planned Activities And Their Volume Is Contained In The Technical Specification And Investment Project Attached To This Documentation.