Tenders Are Invited For Delivery Of Two Specialized Trucks With A Single-Bucket Garbage Truck Body

A Truck With A 6X2i Single-Bucket Garbage Truck Body. Bodywork Of A Single-Chamber 6X2 Garbage Truck (Minimum Requirements)Load Box (Minimum Requirements)• Factory Used, Year Of Production Not Older Than 2019• Single-Chamber With A Load Box Capacity: Min. 19 M3• Load Box Placed On An Intermediate Frame, Individually Adjusted To The Chassis, Which Ensures Optimal Distribution Of Axle Loads And Vehicle Stability.• Box Pusher Plate Equipped With A Telescopic Actuator Double-Acting• Oval Side Walls With A Smooth Surface, Minimum Thickness Of 4 Mm• Oval Load Box Floor Made Of High-Quality Steel, Minimum Thickness Of 6 Mm• Deformation-Resistant Structure, Welded With A Continuous Weld• Inspection Door On The Right Side Of The Box Facilitates Maintenance Work• When Emptying The Load Box, The Push-Out Wall Must Extend Beyond The Box Outline, Enabling Complete Unloading Of Waste• Raised Front Wall To Prevent Leaks Of Liquids And Impurities• Sealed Load Box, Enables The Transport Of Bio-Waste• Load Box Equipped With An Electronic Scale Informing About The Loading Level And The Weight Of The Basket Placed On The Comb Abdomen (Minimum Requirements)• Total Capacity Of The Abdomen: Min. 2.50 M3• Bottom Of The Loading Tub Made Of Hardox400 Steel, Min. 8 Mm Thick• Side Walls Of The Bottom Of The Loading Tub Made Of Steel With A Thickness Of At Least 6 Mm• Tailstock Equipped With Steps For Loaders And Ergonomically Placed Handles• Plates Protecting The Rear Of The Chassis From Dirt During Unloading• Tailgate Opening Cylinders Placed In The Upper Part On The Left And Right Side On The Side Wall• Service Support Mounted On The Left Side In The Bumper• Linear-Plate Crushing System Coin Mechanism (Minimum Requirements)• Fully Integrated, Manual Coin Copier L200, Suitable For Lifting Containers From 120 To 360 Liters As Well As Plastic 4-Wheeled Containers From 500 To 1100 Liters;• Comb Bar With Automatic Container Locking• Additional Din Arms For Lifting Containers• Container Gripper With 3 Positions To Hold Them• Opener For Din Containers 1100 Liters - En840-3 With Round Lids• Automatic Selection Of Container Lifting Speed• Lowered Rear Flap Facilitating Loading Of Bulky Waste And Waste In Bags• Minimum Hopper Width 1.85 M Control And Security• All Electrical, Pneumatic And Hydraulic Elements Should Be Safely Located And Protected Against Damage• Main Control Panel In The Cabin• Raising And Lowering The Tailgate And Unloading Waste Can Be Controlled From The Desktop Located In The Drivers Cabin, As Well As From Side Of The Load Box• Full Closing Of The Tailgate On The Side Of The Load Box In Accordance With The Nen-En1501-1 Standard• Control Of The Device And The Hopper On Both Sides Of The Load Box• Vision System Ensuring Control And Monitoring Of Operation - A Camera On The Tailgate And A Monitor In The Vehicle Cabin, 360O Camera System• Sound Signal For Communication Between The Loader And The Driver• Turning On And Off The Superstructure Hydraulics Via The Power