Request For Quotation Purchase Of Goods (Batteries, Taps, Jibs, Pipes, Bypass) For Nssh No. 1

Radiator Batteries Material Black Rubber, Diameter 42 Mm, Thickness 2 Mm, Temperature Range Usually From -30°C To +100°C (Depending On The Type Of Rubber), Operating Pressure Usually From 1.5 Mpa (May Vary Depending On Designs), Chemical Resistance, Resistance To Most Acids And Alkalis, Electrical Insulation High Dielectric Properties, Flexibility Good Flexibility At Low Temperatures, Resistance To Ultraviolet Radiation, Some Types Of Rubber Can Be Resistant To Uv Radiation., Bypass (Welding 2 Bends With A Diameter Of 25), A Jumper For The Heating System Dn25, Is Designed To Ensure Coolant Circulation Bypassing The Heating Device Or Other Element Of The System Without Stopping The Operation Of The Heating System. Used For Ease Of Operation, Maintenance And Repair. Nominal Diameter (Dn, Du) 25 Mm, Material Steel Pipe Made Of Carbon Steel (St3, St20 Or Equivalent), Welded Connection Method Or Welded With Threaded Connections (Depending On Version), Working Medium Water, Coolant For Heating Systems, Operating Pressure Up To 1.6 Mpa, Operating Temperature Up To +150°C, Tightness, No Leaks At Operating Pressure, Service Life No Less 20 Years Subject To Operating Conditions., Steel Pipe For Installation Of Heating Systems, Water Supply And Process Pipelines, Material Carbon Steel (St3, St20 Or Equivalent), Type Of Pipe: Electric-Welded, Straight Seam Or Water-Gas Pipeline (Depending On The Project), Nominal Diameter (Dn, Dn) 60 Cm/80 Cm, Length 1.5 Cm (For Pipe Dn 80) For Dn 100 - According To The Project Or Measured Length, Wall Thickness According To Gost And Design Documentation (For Example 4.0-4.5 Mm), Working Medium Water, Coolant, Technical Fluids, Working Pressure Up To 1.6 Mpa Or According To The Project, Operating Temperature Up To +150°C, Connection Method Welding, Coating Without Coating Or Anti-Corrosion Coating (On Request), Service Life Of At Least 20 Years Subject To Operating Conditions., Valves (Pipes), Half-Turn Welded Valve, Welded Connection Type (Welded), Nominal Diameter (Dn, Dn) 80 Mm, Nominal Pressure (Pn) Pn16 (1.6 Mpa) Or According To The Project, Body Material Steel (Carbon, For Example St20 Or Analogue), Locking Element Material Steel, Locking Mechanism Type Half-Turn (Rotary 90), Working Medium Water, Process Water, Non-Aggressive Liquids, Petroleum Products (Depending On Version), Gander (Bend) For Connecting A Cast Iron Radiator, Purpose: Connection Of A Steel Pipeline With A Cast Iron Radiator In A Water Heating System, Nominal Diameter (Dn, Dn) 25 Mm, Outer Diameter Of The Pipe 33.5 Mm (For Pipe Dn25 According To Gost), Product Type Welded Bend (Gander), Bend Angle 90 Degrees, Material Carbon Steel (St20, St3 Or Analogue), Method Of Connection: Welding To The Pipeline, Threaded Connection With A Radiator Liner (If Appropriate Design), Working Medium Water, Coolant For Heating Systems, Operating Pressure Up To 1.6 Mpa Or According To The Design, Operating Temperature Up To +150°C, Uncoated Coating Or Anti-Corrosion Primer Coating (On Request), Leak-Tightness Is Not Allowed At Operating Pressure, Service Life Of At Least 20 Years Subject To Operating Conditions