Request For Quotation Printer For Printing Identification Bracelets For Medical Purposes. Device Type:

Printer For Printing Identification Bracelets For Medical Purposes. Device Type: Desktop Printer For Printing Identification Bracelets. Printing Technology: Direct Thermal Printing. Print Resolution: No Less Than 300 Dpi. Printing Speed: No Less Than 51 Mm/Sec. Maximum Print Width: No Less Than 30 Mm. Maximum Print Length: No Less Than 558 Mm. Supported Bracelet Width: From 19 To 30 Mm. Connection Interfaces: Usb 2.0, Usb Host, Ethernet 10/100. Supports Printing Of Linear Barcodes, Two-Dimensional Barcodes (Qr Code, Data Matrix), Text And Graphics. Case Material: Impact-Resistant Plastic. Case Color: White. Power Supply: 220 V, 50 Hz. Overall Dimensions: No More Than 127 × 242 × 178 Mm. Manufacturers Warranty: At Least 12 Months. Compatible With Cartridge Id Wristband System. The Product Is New, Never Used, Not Refurbished, Manufactured No Earlier Than 2025. The Product Must Comply With The Requirements Of The Technical Regulations Of The Eurasian Economic Union In Force On The Territory Of The Republic Of Kazakhstan, And Have Documents Confirming Compliance (Declaration Or Certificate Of Conformity Of The Eaeu, If Confirmation Of Conformity Is Required). In Terms Of Safety And Electromagnetic Compatibility, The Equipment Must Comply With International Standards Not Lower Than Iec 62368-1, Iec 60601-1 (For Medical Power Supply) Or Equivalent Standards.