Tenders Are Invited For Construction Of A Warehouse Base In Łęczna

1. The Subject Of The Order Is The Construction Of A New Single-Story Warehouse Building Without A Basement, With A Gable Roof With An Angle Of 20 Degrees, With A Building Area Of ​​138.5 M2, Rectangular Projection, Dimensions Of 12.14 X 11.34 M, Brick Structure 6.48 M High, Along With Water Supply, Sanitary Sewage And Electrical Installations. A Detailed Description Is Included In The Technical Documentation. As Part Of The Order, The Building Should Be Equipped With Sets Of Modular Warehouse Shelves Made Of Steel Sheet - The Shelf Frame And Shelf Structure Made Of Galvanized Steel Sheet. Cover The Shelves With Sheet Metal Or Mdf Board. Height From 240 To 250 Cm, Total Width 9 M And 10 M. Shelf Width, Length From 100 To 120 Cm, Depth 80 Cm, Body Sheet Thickness Minimum 2.0 Mm, Shelf Load Capacity Minimum 250 Kg/Shelf, Number Of Shelves - 5, And A Single-Sided Aluminum Ladder Equipped With 5 Rungs With An Anti-Slip Coating, Load Capacity 150 Kg.2. A Detailed Description Of The Order Is Included In The Design Documentation, Detailed Technical Specifications For The Execution And Acceptance Of Works, Bills Of Quantities Constituting The Information Basis And In The Draft Contract.3. If The Manufacturers Name, Trademarks, Standards, Approvals, Technical Specifications And Reference Systems Appear In The Swz Or Any Annex To The Swz, The Products May Be Replaced By Equivalent Ones. The Ordering Party Will Consider Equivalent Solutions To Be Solutions That Enable Achieving The Effect Intended By The Ordering Party Using Other Technical Solutions. An Identical (Identical) Solution Cannot Be Considered An Equivalent Solution, But Only One That Shows Exactly The Same Or Very Similar Utility Value In The Compared Features. By Indicating The Manufacturers Name, Trademarks, Standards, Approvals Or Reference Systems, The Ordering Party Aimed To Determine The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only The Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Generally Available Sources, Catalogues, Manufacturers Websites, Etc. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of The Ordering Partys Expectations In Relation To A Specific Solution.4. The Contractors Obligations Related To The Performance Of The Subject Of The Order Are Specified In The Draft Contract. Careful Reading Of The Draft Contract Is Necessary For Proper Preparation Of The Offer.5. The Contractor Is Obliged To Prepare An As-Built Geodetic Inventory And Register It In The District Geodetic Documentation Center At His Own Expense. Comments: 1. Together With The Offer, The Contractor Is Obliged To Submit: 1). Offer Cost Estimate Constituting The Information Basis,2). A Material And Financial Schedule Taking Into