Tenders Are Invited For Refurbishment Of Run-Down Buildings – Lánc U. Roof Insulation - Execution

Refurbishment Of Run-Down Buildings – Lánc U. Roof Insulation - Execution. The Facility Affected By The Development: Pécs, Lánc Utcai Rendelőintétez Address: Pécs, Lánc Utca 12. - Hours: Pécs, 40571/1 Size Of The Area Affected By The Investment: 650 M2 Floor Area. Demolition: •Demolition Of Vertical Waterproofing On Attic Walls, Superstructure Walls, And Ventilation Superstructures •Demolition Of Complete Waterproofing And Heat Insulation On The Surface Of Superstructures Of Pipe Drains •Demolition Of Existing Mechanical Ventilation Structures •Demolition Of Existing Roof Hatch •Partial Demolition And Transformation Of The Support Structure Of Existing Mechanical Systems •Demolition Of Existing Sheet Metal Wall Coverings •Existing Confluences Demolition Of Leaf Baskets, Overflows, Vents • Demolition Of Electrical Systems Support Structures: • Raising Of The Support Structure Of Existing Mechanical Systems, Design Of New Footing Structure Dimensioning According To Static Design Plans Masonry: • Mechanical And Electrical Slab Breakthroughs, Masonry Around Conduits From 15 Cm Masonry Elements, With Monolithic Reinforced Concrete Slab Design Shutters: • Heat-Insulated On A Heat-Insulated Riser Frame Installation Of A Roof Hatch With A Case And Glazing Thermal And Waterproofing: • Thermal Insulation Of The Flat Roof • Waterproofing Of The Flat Roof With 2 Layers Of Bituminous Waterproofing Sheet Internal Works: • Repair Of Internal Leaks, Scraping Of Damaged Parts, Plaster Repair Only With Air And Moisture Permeable Plaster, In Other Cases Smoothing The Necessary Number Of Layers Only With Air And Moisture Permeable Plaster, And Interior Painting Only With Air And Vapor Permeable Paint. Facade Works: • Design Of A New Attic Wall Covering, With A Single-Water Wall Covering, With A White Covering On The Outside. Tin Structures: • Application Of Galvanized Water Dripper And Additional Elements, As Well As Paint-Coated Metal Sheet Covering In The Case Of Attic Wall Coverings, Drainage Of Stairwell And Elevator Engine House Superstructures Is Made With A Paint-Coated Metal Sheet Eaves Drain With System Elements And Accessories. Steel Structures: •Stainless Painted Steel Superstructure, With Removable Cover Placed On The Frame, With Additional Grid Side Vents, Stainless Steel Support Structures For Cable Drainage Protection Against Falling: •A Weighted Mooring Point Is Created On The Flat Roof Surface Of The Bridges Connecting The North And South Parts Of The Building. An Exception To This Is The Horizontal Waterproofing Of The Two Connecting Bridges, Which Will Be Demolished Over The Entire Surface. The New Waterproofing System Is 1 Rtg. It Is Made Of A Bituminous Vapor Barrier Layer, As Well As 2 Layers Of Bitumen Waterproofing Sheets On Top Of The Heat Insulation, Which Are Both Folded Up On The Vertical Wall Surfaces. •Improve The Unevenness Of Horizontal Roof Surfaces With A Special Layer Of Mortar •Renovation Of Flat Roof Thermal Insulation On Horizontal And Vertical Surfaces, As Well As Attic Walls. •The Existing Confluences Will Be Demolished. In All Cases, The Condition Of The Drain Pipe Must Be Checked With A Camera And Cleaned If Necessary. • The Dissolution Is Carried Out By