Request For Quotation Purchase Of Medical Products And Medical Equipment

Disposable Elastic Sheet, Color Blue, Dimensions No Less Than 80X200 Cm, Density No Less Than 20-40 G/M, Skin Antiseptic For Hand Hygiene, Ready For Use. The Volume Of The Bottle Is At Least 1 Liter. The Shelf Life Of The Product At The Time Of Delivery Must Be At Least 70% Of The Total Shelf Life Established By The Manufacturer, Three-Component Sterile Injection Syringe For Single Use. Syringe Volume 20 Ml With A Needle 23Gx1, Made Of High Quality Plastic. The Shelf Life Of The Product At The Time Of Delivery Must Be At Least 70% Of The Total Shelf Life Established By The Manufacturer, Medical Elastic Compression Bandage (Medium Stretch) Length Not Less Than 5 M X Width Not Less Than 10 Cm. The Shelf Life Of The Product At The Time Of Delivery Must Be At Least 70% Of The Total Shelf Life Established By The Manufacturer, Medical Mouth Dilator. Purpose: Designed To Hold The Oral Cavity In An Open Position During Diagnostic, Therapeutic And Dental Procedures. Specifications: Type: Medical Mouth Dilator. Material: Medical Polymer (Silicone Or Polypropylene) Or Medical Stainless Steel, Safe For Contact With The Mucous Membrane. The Design Should Provide Reliable Fixation Of The Jaws Without Damaging Soft Tissues. The Surface Is Smooth, Without Sharp Edges, Burrs, Cracks Or Other Defects. Possibility Of Multiple Sterilization (For A Reusable Product) Or Delivery In Sterile Form (For A Disposable Product). Resistance To Disinfectants (For A Reusable Product). The Product Must Be New And Not Previously Used. The Remaining Shelf Life (For Sterile Products) Or Service Life (For Reusable Products) At The Time Of Delivery Must Be At Least 12 Months., Medical Linguist. Purpose: Designed To Capture, Hold And Fixate The Tongue During Diagnostic, Therapeutic, Surgical And Anesthetic Procedures. Specifications: Type: Medical Tongue Depressor. Material: Medical Stainless Steel, Resistant To Corrosion And Disinfectants. Working Surfaces Must Provide A Secure Grip On The Tongue Without Causing Excessive Injury. The Surface Is Smooth, Without Sharp Edges, Burrs, Cracks Or Other Defects. Total Length: No Less Than 160 Mm. Possibility Of Repeated Sterilization Using Steam, Air And Chemical Methods Without Deteriorating Performance Characteristics. The Product Must Be New And Not Previously Used. The Service Life At The Time Of Delivery Must Be At Least 12 Months., Scalpel, Rolled Paper Towel. Purpose: Designed To Comply With Sanitary And Hygienic Requirements, Wipe Hands And Remove Moisture From Surfaces In Medical, Sanitary And Other Premises. Specifications: Type: Paper Towel Roll. Material: Cellulose Or Cellulose With The Addition Of Waste Paper Fiber. Number Of Layers: At Least 2. Color: White. Roll Width: No Less Than 190 Mm. Winding Length: At Least 100 M. Inner Diameter Of Sleeve: 45–50 Mm (Compatible With Standard Wall-Mounted Dispensers). The Paper Must Have High Absorbency And Strength When Wet. Perforation For Easy Tearing Of Sheets. Should Not Have Any Foreign Odor, Dirt Or Mechanical Damage. Quantity Per Package: At Least 2 Rolls, Bix Medical Sterilization. Purpose: Designed For Placement, Sterilization, Transportation And Storage Of Medical Instruments, Dressings, Surgical Linen And Other Medical Products. Specifications: Type: Medical Sterilization Bix With Lid. Material: Medical Stainless Steel, Resistant To Corrosion And Disinfectants. Capacity: At Least 6 Liters. Equipped With A Tight-Fitting Removable Lid With A Secure Locking Device. Equipped With Ventilation Holes With A Device For Opening And Closing Them (Or Without Holes, Depending On The Type Required). Has A Handle For Easy Carrying. The Surface Is Smooth, Polished, Without Sharp Edges, Burrs, Cracks, Chips And Other Defects. Possibility Of Repeated Sterilization By Steam Method At Temperatures Up To 134 °C Without Deterioration In Performance Characteristics. Resistant To Repeated Treatment With Detergents And Disinfectants., Tweezers, Air Guide Duct. Purpose: Designed To Ensure Airway Patency And Facilitate Tracheal Intubation During Anesthesiological And Resuscitation Measures. Specifications: Type: Air Guide. Version: Disposable. Intended For Use In Adults And Children. Size: No. 4-100. Material: Polyvinyl Chloride (Pvc), Medical Grade. The Material Must Be Non-Toxic, Biocompatible And Safe For Contact With Mucous Membranes. The Surface Is Smooth, Without Burrs, Cracks, Sharp Edges And Other Defects. Color Coding Is Permitted. Delivery In Individual Packaging. The Product Must Be Sterile. The Product Must Be New And Not Previously Used. The Remaining Shelf Life At The Time Of Delivery Must Be At Least 12 Months. Delivery Set: 5 Pcs. In Packaging., Disinfecting Mat. Purpose: Designed For Disinfection Of Shoe Soles At The Entrance To The Premises Of A Medical Organization In Order To Reduce The Risk Of Contamination And Microorganisms. Specifications: Type: Disinfectant Mat. Design: Consists Of A Moisture-Proof Base And A Durable Top Coating That Ensures Retention Of The Disinfectant Solution. Filling: Porous Material With High Absorbency, Resistant To Repeated Use. External Coating Material: Wear-Resistant, Resistant To Disinfectants And Mechanical Stress. Size: No Less Than 500 × 700 Mm. Thickness: Not Less Than 30 Mm. The Mat Must Ensure Uniform Distribution And Retention Of The Disinfectant Solution Over The Entire Working Surface. The Base Must Be Moisture-Proof And Prevent The Solution From Leaking. Repeated Filling With A Disinfectant Solution And Sanitary Treatment Are Allowed Without Deterioration In Performance Characteristics., Kidney-Shaped Medical Tray. Purpose: Designed For Placing Medical Instruments, Dressings And Collecting Biological Fluids During Diagnostic, Therapeutic And Surgical Procedures. Specifications: Type: Medical Kidney-Shaped Tray. Material: Medical Grade Stainless Steel, Resistant To Detergents And Disinfectants. Surface: Smooth, Polished, Without Burrs, Cracks, Chips And Sharp Edges. Corrosion Resistance: The Material Should Not Be Subject To Corrosion During Operation And Repeated Processing. Possibility Of Repeated Sterilization Using Steam, Air And Chemical Methods Without Deteriorating Performance Characteristics. Dimensions: Length Not Less Than 250 Mm, Width Not Less Than 150 Mm, Depth Not Less Than 40 Mm. Capacity: At Least 700 Ml. Shape: Anatomical (Kidney-Shaped)., Wrist Dynamometer, Gel Cooling/Warming Cryopack, Medical Scissors. Purpose: Designed For Cutting Dressings, Medical Products, Fabrics And Performing Medical Procedures. Specifications: Type: Medical Scissors. Material: Medical Stainless Steel, Resistant To Corrosion And Disinfectants. Execution: Straight Or Curved (According To Customers Request). Length: Not Less Than 140 Mm. The Cutting Edges Must Provide A Precise And Smooth Cut. The Articulated Joint Must Ensure Free And Smooth Movement Without Play. The Surface Is Smooth, Without Burrs, Cracks, Chips, Sharp Edges And Other Defects. Possibility Of Repeated Sterilization Using Steam, Air And Chemical Methods Without Deteriorating Performance Characteristics., Wall-Mounted Dispenser For Rolled Paper Towels. Purpose: Designed For Placement, Storage And Convenient Supply Of Rolled Paper Towels In Medical, Sanitary And Other Premises. Specifications: Type: Wall-Mounted Paper Towel Roll Dispenser. Mounting Method: Wall. Housing Material: Impact-Resistant Plastic (Abs Plastic) Or Stainless Steel, Resistant To Detergents And Disinfectants. Designed For Roll Paper Towels With A Standard Core Inner Diameter Of 45–50 Mm. Maximum Roll Diameter: Not Less Than 200 Mm. The Design Should Ensure Easy Roll Replacement And Convenient Supply Of Towels. Equipped With A Gear Mechanism For Convenient Tearing Of Towels. The Presence Of An Inspection Window To Control The Remainder Of The Roll. Equipped With A Lid With A Lock Or Latch. The Surface Is Smooth, Without Sharp Edges, Cracks, Chips Or Other Defects. Color: White, Gray Or Other As Agreed With The Customer. The Delivery Set Must Include Fastening Elements For Wall Mounting., Capacity (Container) For Storing Rags. Purpose: Designed For Storing Clean Or Used Rags In The Premises Of A Medical Organization. Technical Characteristics: Type: Container With A Lid For Storing Rags. Material: Impact-Resistant Plastic (Polypropylene) Or Metal With Anti-Corrosion Coating. Volume: At Least 20 L. Equipped With A Tight-Fitting Lid. The Design Should Ensure Ease Of Carrying And Sanitization. The Surface Is Smooth, Resistant To Detergents And Disinfectants. Color: As Agreed With The Customer. The Product Must Be Resistant To Mechanical Damage And Deformation During Operation., Thermometer For Refrigerator And Freezer. Purpose: Designed To Control The Temperature Inside Refrigerators And Freezers. Specifications: Type: Liquid Or Alcohol Thermometer For Refrigerators And Freezers. Temperature Measurement Range: –30 °C To +30 °C. Scale Division Value: No More Than 1 °C. The Scale Should Be Clear And Easy To Read. The Case Is Made Of Transparent Impact-Resistant Material. Body Color: White/Transparent. Equipped With A Fastening (Hook, Hanger Or Other Device) For Secure Installation Inside The Refrigerator Or Freezer. Does Not Require Batteries. Designed For Repeated Use. The Thermometer Must Be Verified In Accordance With The Legislation Of The Republic Of Kazakhstan In The Field Of Ensuring The Uniformity Of Measurements. At The Time Of Delivery, The Validity Period Of The Verification Must Be Valid. The Supplier Is Obliged To Provide A Document Confirming The Verification (Verification Certificate Or Verification Certificate/Mark In Accordance With The Current Legislation Of The Republic Of Kazakhstan)., Manual Breathing Bag (Ambu Type). Purpose: Designed For Manual Mechanical Ventilation Of Patients During Resuscitation, Anesthesia And Emergency Medical Care. Specifications: Type: Manual Breathing Bag (Ambu Type). Reusable Or Single Use. Intended For Adults. Bag Material: Medical Silicone (Reusable) Free Of Toxic Substances. Self-Expanding Breathing Bag. Equipped With A Non-Reversible Patient Valve. Possibility Of Connection To An Oxygen Source. Equipped With An Oxygen Tank. The Kit Should Include An Appropriately Sized Face Mask, Oxygen Tubing, And Oxygen Reservoir. All Materials That Come Into Contact With The Patients Respiratory Tract Must Be Biocompatible And Safe. For A Reusable Design, The Possibility Of Repeated Disinfection And Sterilization Without Deterioration In Performance Must Be Provided.