Request For Quotation Purchase Of Pumping Equipment To Prepare For The Heating Season

Type: Single-Phase Self-Priming Liquid Ring Pump; Capacity: 3 M³/H (≈ 50 L/Min) Pressure: Up To 51 M Manometric Suction Height: 9M; Fluid Temperature: Diesel Fuel/Fuel Oil - Up To +55°C, Water - Up To +90°C, Environment - Up To +40°C; Power Supply: Single-Phase 220V, 50Hz; Motor Power: 0.75 Kw (≈1 Hp) With Thermal Protection; Weight: ≈ 10.9–11.8 Kg; Dimensions: Approx. 296 × 140 × 180 Mm Designed For Pumping Viscous Aggressive Liquids: Oil, Fuel Oil, Diesel Fuel, Oils At Temperatures Up To +70°C. Pump Body: Gray Cast Iron With Threaded Connections According To Iso 228/1; Impeller: Brass, “Star-Shaped” With Open Radial Blades; Drive Shaft: Stainless Steel; Seal: Mechanical Ceramics‑Graphite‑Viton; Engine Cooler: Enclosed Fan (Tefc); Protection Class: Ipx4 Class, Class F Insulation, Motor Designed For S1 Continuous Duty. Unloading Of Goods Is Carried Out By The Supplier. A Mandatory Condition Is The Presence Of An Authorized Representative Of The Supplier Upon Acceptance Of The Goods. If The Goods Are Delivered By Courier, The Latter Must Provide A Duly Executed Power Of Attorney. The Customer Is Not Responsible For The Safety Of The Goods From The Moment It Is Handed Over To The Supplier Until The Completion Of Unloading. Fuel Transfer Pump, Purpose: Designed For Lifting And Supplying Clean Water From Wells, Wells And Reservoirs In Domestic Drinking Water Supply Systems. Pump Type: Submersible, Centrifugal. Supply Voltage: 220 V, 50 Hz. Motor Power: Not Less Than 1.1 Kw. Maximum Pressure: Not Less Than 80 M, Maximum Immersion: Not Less Than 60 M. Material Housing: Stainless Steel., Purpose: Designed To Increase And Supply The Required Clean Water Pressure In Domestic Drinking Water Supply Systems. Installation Type: Automatic Booster Pumping Station. Number Of Pumps: At Least 2 Pcs. Pump Type: Centrifugal. Pressure: At Least 108 M. Maximum Flow 14.4 M3/Hour. Operating Pressure: Up To 10 Bar. Supply Voltage: 380 V, 50 Hz. Pump Body Material: Stainless Steel. Collector Material: Steel With Anti-Corrosion Coating Or Stainless Steel. Automatic Pressure Control. Presence Of A Control Cabinet Protected From Dry Running, Overload And Short Circuit., Body: Cast Iron. Capacity: 72 M³/H (~1200 L/Min), Operating Point Is Usually 60 M³/H At A Pressure Of ≈10.5 M Maximum Pressure: Up To 18–18.5 M, Nominal – About 18.1 M At 60 M³/H Suction Depth: Up To 7M Electric Motor Power: 2.2 Kw (~3 Hp) With Three-Phase Connection 380V, 50Hz; Speed – 2900 Rpm. Housing: Cast Iron With Threaded Connections Gas Uni Iso 228‑1 (3 Inlet/Outlet) Impeller: Radial Type, Brass (Cw617n) For Reliability And Corrosion Resistance Seal: Mechanical, Ceramic-Graphite (Fn‑18) Weight (Mass): ≈29–30 Kg Overall Dimensions: Length: ~360 Mm. Width: ~210 Mm. Height: ~250 Mm. Designed For Pumping Clean Or Slightly Contaminated Water. Unloading Of Goods Is Carried Out By The Supplier. A Mandatory Condition Is The Presence Of An Authorized Representative Of The Supplier Upon Acceptance Of The Goods. If The Goods Are Delivered By Courier, The Latter Must Provide A Duly Executed Power Of Attorney. The Customer Is Not Responsible For The Safety Of The Goods From The Moment It Is Handed Over To The Supplier Until Unloading. Pump Hf-6A, Pump Hf-8A Type: Surface Centrifugal Single-Stage Pump. Capacity 1200 L/Min (72 M³/Hour); Head Up To 24.5 M; Rotation Speed 2900 Rpm; Manometric Suction Height Up To 7 M; Liquid Temperature From -10 °C To +90 °C. Weight 37–41Kg Dimensions ~465×245×312Mm Materials Cast Iron, Brass, Stainless Steel Seal Ceramic-Graphite. Designed For Pumping Clean Or Slightly Contaminated Water. Unloading Of Goods Is Carried Out By The Supplier. A Mandatory Condition Is The Presence Of An Authorized Representative Of The Supplier Upon Acceptance Of The Goods. If The Goods Are Delivered By Courier, The Latter Must Provide A Duly Executed Power Of Attorney. The Customer Is Not Responsible For The Safety Of The Goods From The Moment It Is Handed Over To The Supplier Until Unloading.