Tenders Are Invited For Reconstruction Of The Section Of Municipal Road No. 639003 S Ul. Baczyńskiego In Krzepice

The Subject Of The Order Is The Reconstruction Of A Section Of Municipal Road No. 639003 S Ul. Baczyńskiego In Krzepice, Consisting Of Widening The Road On A Section Of 104 M To 6.0 M, And Rebuilding A 1.8 M Wide Sidewalk With A Length Of 39 M And Constructing New Roadsides With Compaction And Profiling To Appropriate Slopes. The Scope Of Works To Be Performed As Part Of The Reconstruction: 1) Geodetic Measurement Works During The Works, 2) Earthworks And Demolition Of The Road Surface And Sidewalk, 3) Installation Of 15X30 Concrete Road Curbs On A C12/15 Concrete Footing, 4) Construction Of A Substructure Made Of Crushed Aggregate 0-31.5 Mm Thick. 23 Cm On The Widening, 5) Making A Layer Of A Mixture Bound With C1.5/2≤4.0Mpa Cement, Thickness. 15 Cm On The Widening, 6) Making A Drainage Layer Of Sand, Thickness. 10 Cm On The Widening, 7) Making A Layer Of Crushed Aggregate 0-31.5 Mm Thick. 15 Cm,8) Height Regulation Of Existing Aggregate Exits,9) Height Regulation Of Existing Sewage Wells And Inlets,10) Construction Of The Roadside With Planting And Compaction,11) Accompanying Works: Related To The Introduction Of Traffic Organization,12) Post-Construction Geodetic Inventory. Notethe Scope Of Works Covered By The Contract Also Includes The Dismantling Of The Fence Colliding With The Reconstruction Of The Road And The Installation Of A Fence With Concrete Slabs According To The New Location. The Investor Marked The Route Of The New Fence On The Above-Mentioned Pzt. Project. It May Be Slightly Modified. Data Regarding The Fence: 1) Concrete Fence, Height 1.8 - 2.00 M, Length Approximately 68.00 M, 2) Panels With A Structure Imitating A Board Pattern: Length 2.00 M, Width 0.25 M, Thickness 0.04 M. Before Starting The Works, A Temporary Road Traffic Organization Project Must Be Developed And Implemented In Accordance With The Regulations. A Lump Sum Remuneration Is Payable Once. Note Due To The Lump Sum Remuneration, The Ordering Party Does Not Provide A Bill Of Quantities. The Ordering Party Emphasizes That The Preparation Of The Bill Of Quantities For The Valuation Of The Offer Is The Responsibility Of The Contractor On The Basis Of The Attached Design Documentation And Field Inspection Of The Facility. A Detailed Description Of The Subject Of The Order Is Specified In The Design Documentation And The Technical Specification For The Execution And Acceptance Of Construction Works, Hereinafter Referred To As Stwior. It Is An Attachment To The Contract Notice And Is Available On The Website Of The Ongoing Procedure.