Request For Quotation Purchase Of Materials (Pa)

Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: • Drilling Diameter: Strictly 18 Mm. • Working Length: Not Less Than 410 Mm. • Total Length: No Less Than 460 Mm. • Shank Type: Sds-Plus (Standard Design To Ensure Compatibility With Hammer Drill Chucks Of This Type). • Processed Material: Concrete, Brick, Stone, Dense Building Materials. • Design Features Of The Tip: - Geometric Shape Of The Cutting Part With 4 Carbide Cutting Edges (Cruciform Geometry) To Ensure Accurate Centering, High Penetration Speed And Prevent The Drill From Jamming When Hitting The Reinforcement. - The Presence Of A Carbide Tip Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To High Temperature And Shock Loads. - Drill Body: Made Of Hardened Alloy Steel With An Optimized Auger Spiral For Fast Removal Of Sludge. • Compliance With Standards: Gost 3882, Gost 34023-2016 Or Equivalent. Gost 3882 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Concrete Drill For Rotary Hammers With The Sds-Plus Fastening System: Drilling Diameter: Strictly 6 Mm. Working Length: Not Less Than 100 Mm. Total Length: No Less Than 160 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Analogue), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: • Drilling Diameter: Strictly 20 Mm. • Working Length: Not Less Than 550 Mm. • Total Length: Not Less Than 600 Mm. • Shank Type: Sds-Plus (Standard Design To Ensure Compatibility With Hammer Drill Chucks Of This Type). • Processed Material: Concrete, Brick, Stone, Dense Building Materials. • Design Features Of The Tip: - Geometric Shape Of The Cutting Part With 4 Carbide Cutting Edges (Cruciform Geometry) To Ensure Accurate Centering, High Penetration Speed And Prevent The Drill From Jamming When Hitting The Reinforcement. - The Presence Of A Carbide Tip Made Of High-Strength Alloy (Type Vk8 Or Equivalent), Resistant To High Temperature And Shock Loads. - Drill Body: Made Of Hardened Alloy Steel With An Optimized Auger Spiral For Fast Removal Of Sludge. • Compliance With Standards: Gost 3882, Gost 34023-2016 Or Equivalent. Gost 3882 (Se), Description Of The Required Characteristics, Parameters And Other Initial Data Dimensions: 6 × 9 Mm (Width × Height). Material: Brass. Mounting Method: On Din Rail. Connection Method: Screw. Number Of Connections: Usually From 8 To 12 Holes. Rated Current: 100 A. Rated Voltage: 400 V. Temperature Range: -40 To +105°C. Degree Of Protection: Ip00 (No Protection From External Factors). Average Relative Humidity, Not More Than 90% Length: 78 Mm Insulator Color: Yellow. Weight: 32 To 42 G Gost R 51321.1-2007 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Analogue), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 10 Mm. Working Length: Not Less Than 150 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Analogue), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se), Concrete Drill For Rotary Hammers With Sds-Plus Fastening System: Drilling Diameter: Strictly 12 Mm. Working Length: Not Less Than 250 Mm. Total Length: No Less Than 210 Mm. Purpose: For Rotary Impact Drilling Of Reinforced And Non-Reinforced Concrete, Brick, Dense Stone. Design Features: - The Presence Of A Carbide Plate (Tip) Made Of High-Strength Alloy (Type Vk8 Or Analogue), Resistant To Temperature Loads. - Centering Tip To Prevent The Drill From Moving To The Side. - Optimized Spiral (At Least 2 Turns) For Quick Removal Of Sludge And Reduction Of Vibration Load On The Tool. • Drill Body: Made Of Hardened Alloy Steel, Resistant To Bending And Dynamic Impacts. Gost 3882 (Se)