Tenders Are Invited For Other Electrical Installation Work – Vob 17-25O Construction Of A Vocational School Campus Ba 1; Ve 2-4810 House Ii Building Automation

Other Electrical Installation Work – Vob 17-25O Construction Of A Vocational School Campus Ba 1; Ve 2-4810 House Ii Building Automation. To Use The Software, Each Floor Is Divided Into Different Areas. This Is Done Taking The Fire Compartments Into Account. An Io Node Is Used In Each Of These Areas. The Respective Areas Are Divided Into The Areas Required For The Application. The Hardware Design Of The Respective Io Node Is Based On The Information In The Floor Plans And Overview Plans. With The Weather Station Described Later, Weather Data Can Be Taken Into Account In The Applications And The Curtains Can Be Controlled According To The Weather. The Licenses Required For Shading Correction And Dynamic Wind Monitoring Are Listed In The List Of Services. Up To 3 Dali Ecgs Or A Dali Group Can Be Controlled In Each Area. These Are Controlled Via Light Buttons, A Dali Presence Detector Or Multisensor. With Dali, It Is Generally Important To Adhere To The Maximum Possible Cable Lengths Depending On The Cable Cross Section. Furthermore, It Must Be Noted That A Maximum Of 64 Dalievgs Can Be Controlled By A Dali Module 753-647. Another Option For Lighting Control Is Using Conventional Lighting. This Is Also Switched On/Off Using A Light Button. One Light Group Can Be Controlled Per Special Area. According To The General Plan, Radiators Are Planned In Some Areas. In These Areas, The Radiator Is Controlled Via An Actuator Using Mp-Bus. A Temperature Sensor Is Used To Record The Temperature In Each Of These Areas. According To The Overview Plans, Room Temperature Controllers Will Be Installed In Some Areas. These Are Connected To The Node Via Modbusrtu. The Blinds Are Raised Or Lowered In The Individual Areas Using A Blind Button. The Blinds, The Blinds And Sometimes Also The Light Buttons Are Connected To The Io Node Via Blind Boxes. According To The Overview Plans, Circulating Air Cooling Units Will Be Installed In Some Rooms. Up To 5 Ulks Per Node Can Be Connected To The Node Via Modbusrtu. The System Devices (Controllers, Etc.) Are Housed In The Designated Sub-Distributions.