Tenders Are Invited For Supply And Delivery Of Rigid Hull Vessel

Quotation are invited for Supply and Delivery of Rigid Hull Vessel Delivery Date: 2026/08/31 Delivery To: Gregg Oelofse Delivery Address: 00 Lighthouse Rd, Kommetjie, Soetwater Nature Reserve Closing Date: 2026/07/23 Closing Time: 10:00 AM Description: Supply and delivery of rigid hull vessel Specification: * Project Manager: Gregg Oelofse Manager: Coastal Management, Environmental Management Spatial Planning and Environment Tel: 021 487 2239|Cell: 083 940 8143 Vessel must conform to SAMSA safety standard but it not required on delivery as the City will complete the SAMSA registration itself RFQ to supply and deliver a general purpose Rigid Hull Vessel on trailer only, excluding outboard motors, but including all fittings and necessary wiring to accommodate a twin 140HP Suzuki installation. Vessel should come fitted with the below items, but alternatives and additions as recommended by the boat manufacturer can be include in the quotation. Indicative Dimensional Requirements Min Max Internal Volume 5.95 Length OA 6.7 7.1 Beam OA 2.5 2.6 Freeboard 0.8 Draft 0.4 0.43 Deadrise 17° 18 ° Transom 15° Transom Height Transom must accommodate a twin 140HP Suzuki installation. Transom Length 0.63 m Transom must accommodate a twin 140HP Suzuki installation. Construction GRP Fuel Min 200 l Max 400 l Hull Weight Min 880 kg Max1400 kg Boat plus trailer Min 1393 kg Max 3500 kg 1. Minimum seating capacity 6 persons 2. Hand railing installed at bow 3. The vessels must have marine tow connections vessel will require secure attachment points on port and starboard side at the stern to attach a towing bridle. 4. Kevlar keel strip to be installed. 5. Engines must be protected by a suitable, approved protective ski bar. This must be marine grade of stainless steel and must accommodate two Suzuki 140HP twin installation with sufficient clearance. 6. The motor consul panel/s must include fuel, temperature and oil gauges, and a marine grade 12v electrical outlet. The consul colour scheme must be a standard white. 7. All required wiring must be provided, to accommodate a twin installation 140HP Suzuki engines. Wiring must be installed and ready for installation of the engines. Wiring must include wiring from batteries to engines. 8. A suitable hydraulic steering mechanism, including steering wheel, to be supplied that will accommodate twin Suzuki 140HP installation 9. Marine GPS: Garmin, ECHOMAP UHD2 Touch 62sv WW w/GT54 xdcr with Hydrographic Sonar and built-in transducer (Or equivalent) to provide depth to sea bottom measurement (not a fish finder). 10. Marine VHF Radio: Supplier shall offer a suitable marine radio to the clients satisfaction. 11. The vessel shall be fitted with night lights suitable for night rating and for low level deck lighting. 12. Deck must be gel coated for extra durability 13. Lockable storage bins with suitable marine grade locks must be included. 14. Vessel must be supplied with appropriate batteries and fuel pump in suitable housings 15. A single 200l, built in fuel tank with sender, must be fitted. 16. 1 x Sampson post & bow roller 17. Heavy duty bumper rail 18. 2 x Large scuppers 19. Helm Seat with cushions and adjustable back rest 20. Vessel quoted must conform to SAMSA safety requirements for small vessels only. CoCT will be responsible for the Certificate of Fitness after delivery. 21. The colours shall be to City of Cape Town colours. 22. Vessel to be supplied on suitable trailer, with flushable hubs and sealed bearings. 23. An operating manual to be supplied with vessel, together with all required documentation 24. The trailer shall have its first registration and license with respect to the National Road Traffic Act (Act 93 of 1996) (as Amended) in the name of the City of Cape Town. Necessary documentation will be supplied to vendor. 25. Vessel to be delivered to an address within the City of Cape Town. Pic provided for illustrative purposes only. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/324879