Request For Quotation Purchase Of Plumbing Products

Bend (Angle) Ppr Ø20 Mm, 90°. Characteristics And Description. Warranty Period 10 Years Work Environment. Liquid Medium, Non-Aggressive Medium, Water Solder Connection Type. Bend Angle 90 Degrees. Conditional Bore 20 Mm. Angle Material: Polypropylene User Characteristics. Color - Gray And White. Size - 20 Mm Angle 90° Donsen Pp-R For Soldering For Polypropylene Pipes. Made From South Korean Raw Materials And Meets German Din Standard. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Ppr Plug. Rtp Plug 10548 20 Mm Pipe Diameter-20 Type-Plug Material: Polypropylene. Upon Delivery, The Goods Must Be Agreed Upon With The Customer., Ppr Reinforced Pipe Ø 15 Mm. Characteristics. Wall Thickness Is 15 Mm. Purpose - Intended For Laying Pipeline Communications In Residential And Industrial Premises Material - Polypropylene (Ppr/Ppr-Gf/Ppr) Type - Pipe Application: For Plumbing, For Heating Maximum Operating Temperature, C+ 95 C Nominal Pressure, Pn (Bar) 25 Connection Type: Welded Shipping Rod 4M Reinforcement Type: Fiberglass. Materials And Colors Material Polypropylene (Ppr/Ppr-Gf/Ppr) Installation Features - Welded Connection Type. Upon Delivery, The Goods Must Be Agreed Upon With The Customer., Smooth Rigid Pvc Pipe D=20Mm Grey. Smooth Pipes Are Used For Laying Power And Low-Current Lines Inside Buildings And Structures. The Presence Of Many Accessories Ensures Convenient Installation Of The Cable Route. Advantages Of Ctr10-020-K41-2-050: The Occurrence Of A Fire In The Event Of A Short Circuit Is Excluded. Additional Protection Of Wiring From Mechanical Damage. Characteristics Of Ctr10-020-K41-2-050: Manufacturer Iek Outer Diameter 20 Mm. Color: Gray. Pvc Material Pipe Length 2 M. Strength 350 N. Wall Thickness 1.0 Mm Flush Mounting - Plaster - Yes. Flexural Strength-Hard Internal Diameter 18.0 Mm. With Sleeve - No. Halogen-Free No Suitable For Installation In Concrete - No. Screed Strength Class Light (Class 2) Fireproof No. Degree Of Protection - Ip Ip40 Insulation Resistance At Ac 500V-100 M Ohm. Operating Temperature -15...60 °C Impact Resistance According To En 50102-Light (Class 2) Smooth Inner Coating - Yes. Fire Resistance Category According To Gost 28779 Fv(Pv)0 Rated Voltage - 1000 V. Outdoor Installation - No. 100 Pieces, 2 Meters Each. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Couplings-Connection. Characteristics And Description Type Of Coupling - Connecting 20 Mm The Maximum Temperature Of The Working Environment Is 70 Degrees. Coupling Material. Polypropylene. Working Environment Non-Aggressive Environment, Water Working Pressure 9 Bar. Connection Type Soldering. Nominal Diameter 20 Mm User Characteristics. Color - Gray And White Polypropylene Coupling (Pp-R) Donsen, Designed For Soldering For Polypropylene Pipes. Made From South Korean Raw Materials And Meets The German Din Standard. When Delivering The Goods, Agree With The Customer. Marat 87015125470., Type Of Coupling - Connecting, Diameter 15 Mm. Characteristics And Description Type Of Coupling Connecting. The Maximum Temperature Of The Working Environment Is 70 Degrees. Coupling Material Polypropylene. Working Environment Non-Aggressive Environment, Water Working Pressure 9 Bar. Solder Connection Type. Nominal Diameter 50 Mm User Characteristics. Color Gray And White Polypropylene Coupling (Pp-R) Donsen, Designed For Soldering For Polypropylene Pipes. Made From South Korean Raw Materials And Meets The German Din Standard. . The Product Must Be Agreed Upon With The Customer., Tee Ppr Ø20 Mm. Characteristics And Description Basic Diameter Of The First End Of The Ppr 20 Pipe Tee Material Polypropylene User Characteristics Material Grade: Ppr. Upon Delivery, The Goods Must Be Agreed Upon With The Customer., Squeegee ½ Steel. Characteristics. Country Of Manufacture - Russia. Main Material - Steel. Pipe Material - Steel Tip Type. With Screw Fastening. Product Type. Squeeze-Diameter (Mm)-15 Thickness (Mm)-2.8-Length (M)0.11. Inner Diameter (Mm) -15. Net Weight (Kg) -0.095 Product Weight In Individual Packaging (Kg) -0.095 Color Palette: Black. External Diameter (Mm) -21.3. Maximum Temperature (C)-175 Application Temperature (C) -175. Diameter (Inch) - 1/2 Quot. Pipe Inner Diameter (Mm) -15 Pipe Outer Diameter (Mm) - 33.5. Pipe Diameter (Mm) -15. Pipe Length (M) - Less Than 10 The Squeegee Is Used When Installing A Pipeline And Connecting Household Appliances Or Shut-Off Valves To It. The Part Is A Piece Of Steel Pipe With A Diameter Of 1/2 Inch And A Length Of 110 Mm, Equipped With External Threads At Both Ends. The Wall Thickness Of The Squeegee Is 2 Mm, Allowing It To Withstand Significant Pressure. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Ball Valve ½ For Heating . Conditional Bore 15 Mm. Manufacturer-Loctite The Valve Body Is Made Of High-Strength Nickel-Plated Brass, Brand Cw617n, Using Hot Stamping. The Stem Is Inserted From The Inside Of The Valve, Which Prevents The Stem From Being Knocked Out By Pressure. The Lever-Type Handle And The “Butterfly” Handle Are Made Of Cast Aluminum And Painted Red With Abrasion-Resistant Enamel. The Handle Is Secured With A Nickel-Plated Brass Nut, Which Avoids The Effect Of A “Galvanic Couple” Between The Rod And The Nut And Eliminates Premature Corrosion At The Joint. The Maintainability Of The Faucet Is Achieved Due To The Possibility Of Tightening The Stuffing Box Nut Assembly Located Under The Handle.. The Valve Ball Is Made Of Hot-Pressed Brass Brand Cw617n And Subjected To Diamond Polishing, Followed By Chrome Plating.. The Sealing Materials Used In The Design Of The Ball Valve Are Made Of Heat-Resistant And Wear-Resistant Fluorine Rubber (Fkm) And Primary Fluoroplastic (Ptfe G400), Which Allows The Use Of This Series In High-Temperature Lines With Working Temperatures Up To 185°C.. The Tightness Of The Connection Of The Large And Small Half-Bodies Is Achieved Through The Use Of Anaerobic Hardening Sealant Loctite 620, Which Fully Complies With The Safety Requirements For Contact With Drinking Water.. The Mounting Hole Of The Removable Pipe Is Made In The Shape Of A Hexagon, Which Eliminates The Possibility Of Breaking The Pipe During Installation And Dismantling Work With The Product.. Each Faucet Is Supplied With Two Plugs - Markers In Blue And Red Colors That Can Be Installed On The Tap Stem To Visually Indicate The Intended Use Of Taps In Hot Or Cold Water Supply Systems. Temperature Range: From -30 To +185°C.. Nominal Pressure: From 50 Bar To 20 Bar (Depending On Diameter). Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Half Bend 45 * Degree. Characteristics. Manufacturer - Donsen Solder Connection Type. Bend Angle: 45 Degrees. Material: Polypropylene Working Medium Is Water. Color: Beige Working Environment - Liquid Environment, Non-Aggressive Environment. Working Pressure - 9 Bar The Maximum Temperature Of The Working Environment Is 70 Degrees. Conditional Passage Is 15 Mm. Description. The 45° Angle Pp-R Donsen Is Designed For Soldering For Polypropylene Pipes. Made From South Korean Raw Materials And Meets German Din Standard. The Product Must Be Agreed Upon With The Customer., American ½. Angle Squeegee Valfex Is A Connecting Fitting. It Is Equipped With An Internal Thread And Is Designed For Creating Connections. The Squeegee Is Suitable For Hot And Drinking Cold Water Supply Pipelines, As Well As Heating Systems. Can Be Used In Production When Supplying Compressed Air, Process Gases And Liquids. The Model Is Made Of Brass And Ensures Reliable Fixation Of The Connection. Nickel-Plated Coating Prevents Corrosion. The Squeegee Is Adapted For A Pressure Of 4.0 Mpa And Can Withstand Temperatures Transmitted Substances From -20 To +150°C. Features: - Product Type - Brass;. Plating - Nickel;. Type Of Installation - With Screw Fastening;. Diameter - 1/2 Inch;. Manufacturers Warranty - 10 Years. Thread Type - External / Internal. Thread Diameter (Inches) - 1/2 Basic Material. Maximum Operating Pressure (Bar)40 Maximum Application Temperature (°C) 120 Length (Mm) 41 Scope Of Application - Hot Water Supply System, Cold Water Supply System Product Type - American Straight. Plating - Nickel Plated Color - Gray / Silver Country Of Origin: Russia. Warranty (Years)-10 Weight-0.083. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Bend (Angle) Ppr Ø15 Mm, 90°. Plumbing Elbow (Elbow) Polypropylene 90 Degrees 15 Mm Deniz This Is A Type Of Polypropylene Fitting That Is Designed To Change The Direction Of Pipelines And Connect Pipes Of The Same Size To Each Other. Widely Used In The Installation Of Water Supply, Heating, Floor And Central Heating Systems. Installation Is Carried Out Using The Socket Welding Method. Specifications: Nominal Diameter - 20 Mm. Thickness - 4.2 Sdr - 6 Working Pressure: 25 Bar. Pn: 25 Material: Ppr Polypropylene Production: Deniz. Color - White, Gray Gost: 32415-2013 Where Used: For Heating And Water Supply Service Life: More Than 50 Years The Product Must Be Agreed Upon With The Customer., Combined Coupling Ø15 ×½ Bp Combined Coupling - Fitting For Transition From A Polypropylene Pipe With A Diameter Of 20 Mm To A Metal Pipe With A 1/2 Thread. Connection - External/Solder. The Coupling Is Used In Heating, Air Conditioning, Hot And Cold Water Supply Systems, Including Drinking Water Pipelines. The Main Material Is White Polypropylene. Product Length Is 4.87 Cm. The Fitting Is Operated At Liquid Temperatures Up To 90 °C And Pressure Up To 25 Bar. Characteristics. Brand-Valfex. Diameter - 1/2X20. Length (Mm) -48.7 Thread Type - External. Installation Type. Threaded, Soldered. Connected Pipe Material: Polypropylene Maximum Operating Temperature (°C) . Goods Upon Delivery Must Be Agreed With The Customer. Marat 87015125470., Ppr Tee Ø15 Mm. Characteristics And Description Tee Material Polypropylene Working Medium Air, Liquid Medium, Water Connection Type Solder Tee Type Equal Custom Specifications Size 15 Ppr Tee, Designed For Soldering For Pipeline Construction. The Material Is Made From South Korean Raw Materials And Complies With The German Din Standard. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470., Squeegee D 15 Mm L 110 Mm Steel Color Black. Squeeze D 15 Mm L 110 Mm Steel Color Black Part Material: Steel. Connection Type - Thread Pipe Diameter - 15Mm Thread Diameter Pipe Material - Steel Information Characteristics. Locknut Type Thread Length Is 25.0 Mm. Upon Delivery, The Goods Must Be Agreed Upon With The Customer. Marat 87015125470.