Request For Quotation Products To Ensure Facility Accessibility For People With Limited Mobility

Tactile Information Sign “Entrance” In Braille. Product Type: Tactile-Visual Information Plate. Purpose: To Indicate The Entrance To A Building (Premises) And To Inform Persons With Visual Impairments. The Inscription Is “Entrance”. The Information Must Be In Raised Font And Duplicated In Braille. The Size Of The Plate Is 150 × 150 Mm. Material: Pvc Plastic, Acrylic Or Composite With A Thickness Of At Least 3 Mm. Color Design - Contrasting (Yellow Background/Black Text Or Other Contrasting Combination). The Height Of The Relief Symbols Is At Least 1 Mm. The Surface Is Smooth, Without Sharp Edges Or Burrs. Inscriptions And Relief Elements Must Be Resistant To Abrasion, Moisture, Ultraviolet Radiation And Wet Cleaning Agents. Mounting Method: Double-Sided Mounting Tape Of Increased Strength Or Mechanical Fastening. Operation - Indoors. The Product Must Be New, Previously Unused, Without Mechanical Damage. The Product Must Provide Convenient Visual And Tactile Perception Of Information And Meet Accessibility Requirements For People With Limited Mobility., The Rolling Ramp Pp 68*75 Is A Mobile Equipment That Helps People In Wheelchairs Overcome Small Thresholds And Curbs. Can Be Used Outdoors And Indoors. The Ramp Is Easy To Move From Place To Place As Needed, Since It Does Not Require Special Installation. Width - 680 Mm. Length - 750 Mm. Height - 100 Mm. Weight: 4.1 Kg. Maximum Load - 270 Kg. Portable, Mobile, Installed On Top Of An Obstacle. Anti-Slip Corrugated Surface. Anti-Slip Pads., Wireless Personnel Calling System For People With Limited Mobility For The Purpose Of Prompt Assistance. Designed For Installation At The Entrance To The Building, On A Ramp, In A Sanitary Room Or Other Accessible Place. Delivery Set: Wireless Button To Call For Help - 1 Piece, Signal Receiver (With Light And Sound Indication) - 1 Piece, Tactile Information Plate Call For Help Button - 1 Piece, Batteries - 1 Piece, Set Of Fasteners. System Type: Wireless. The Signal Transmission Range In Open Areas Is At Least 200 M, The Operating Frequency Is At Least 433-434 Mhz Or Equivalent. Light And Sound Call Indication. Possibility Of Adjusting The Signal Volume. Button Power (Autonomous - Battery). Receiver Power Supply: 220 V, 50 Hz. Button Protection Degree: Not Lower Than Ip67. The Button Must Be Waterproof And Suitable For Use Indoors And Under A Canopy. The Case Material Is Impact-Resistant Plastic. The Color Of The Button Is Contrasting And Clearly Visible. The Button Must Have The International Symbol Of Accessibility (Wheelchair) Or The Inscription “Call For Help”. The System Must Provide Stable Signal Reception Without False Alarms. The Product Is New, Never Used, Without Mechanical Damage. Warranty: 12 Months. Delivery Is Complete, Ready For Installation And Operation. Width Not Less Than 90 Mm, Depth Not Less Than 15 Mm, Length Not Less Than 150 Mm., Contrast Sticker “Yellow Circle” For Marking Glass Doorways Within The Framework Of Accessible Environment Requirements. Self-Adhesive Round Sticker. Color - Yellow (Contrasting). Material: Vinyl (Pvc) Film. Diameter - 150–200 Mm (The Most Common Size Is 200 Mm). Designed For Marking Transparent Doors And Partitions To Prevent Collisions, Including For Visually Impaired People. The Sticker Is Placed On Both Sides Of The Glass Door., Tactile Information Sign Toilet For The Disabled In Braille. Purpose - Designation Of A Sanitary Room Equipped For Use By Persons With Disabilities And People With Limited Mobility. The Inscription: “Toilet For The Disabled.” The Plate Must Have A Raised Image And Duplicate Information In Braille. The Size Of The Plate Is 150 × 150 Mm. Material Of Manufacture: Pvc Plastic, Acrylic Or Composite With A Thickness Of At Least 3 Mm. The Color Design Is Contrasting, Providing Good Visibility For Visually Impaired People. Text And Symbols Must Be Made In Relief. Braille Font Is Raised, Tactilely Distinguishable, Printed In Accordance With The Requirements For Tactile Information. The Accessibility Pictogram (Image Of A Person In A Wheelchair) Is Raised. The Height Of The Protruding Elements Is At Least 1 Mm. The Surface Of The Product Is Smooth, Without Sharp Edges, Burrs Or Defects. The Application Of Information Must Be Resistant To Abrasion, Moisture And Cleaning Agents. Fastening - Double-Sided Mounting Tape Of Increased Strength Or Hidden Mechanical Fastening. Place Of Use: Indoors. The Product Must Be New And Not Previously Used. Cracks, Chips, Scratches And Deformation Are Not Allowed. The Product Must Provide Visual And Tactile Perception Of Information For People With Visual Impairments And Meet The Requirements For Accessibility Of Objects For People With Limited Mobility., Tactile Information Sign “Direction Of Movement” In Braille. Product Type: Tactile-Visual Information Plate. Purpose - To Indicate The Direction Of Movement Inside The Building And Ensure Accessibility Of Information For People With Visual Impairments. Inscription/Designation - “Direction Of Movement” (With An Indicating Arrow In The Direction Of Movement). The Information Must Be In Raised Font And Supplemented With Tactile Markings (Arrows) And Braille. The Size Of The Plate Is 150 × 150 Mm. Material: Pvc Plastic, Acrylic Or Composite With A Thickness Of At Least 3 Mm. The Color Design Is Contrasting, Ensuring Visibility For Visually Impaired Persons. Relief Elements Must Have A Protrusion Height Of At Least 1 Mm. Braille Font Must Be Made In The Form Of Raised Raised Dots, Suitable For Tactile Reading. The Surface Is Smooth, Without Sharp Corners And Burrs. The Coating And Application Of Information Must Be Resistant To Abrasion, Moisture And Wet Cleaning Agents. Fastening - Double-Sided Mounting Tape Of Increased Strength Or Hidden Mechanical Fastening. Designed For Indoor Use. The Product Must Be New And Not Previously Used. Cracks, Chips, Deformation And Damage To The Surface Are Not Allowed. The Product Must Provide Visual And Tactile Perception Of Information For People With Limited Mobility., Tactile Information Plate In Braille “Manager”. Designed To Inform Persons With Visual Impairments About The Purpose Of The Premises In Accordance With Accessibility Requirements For People With Limited Mobility. Specifications: Product Type: Tactile-Visual Information Plate. Size - 300 × 200 Mm. Base Material - Pvc Plastic, Acrylic Or Composite With A Thickness Of At Least 3 Mm. The Background Color Is Yellow (Or Another Contrasting Color). Text Color Is Black. The Inscription Is “Manager”. The Information Must Be In Raised Font And Duplicated In Braille. The Height Of The Relief Of The Symbols Is At Least 1 Mm. Braille Must Comply With Current Requirements For Size And Dot Placement. The Surface Of The Product Is Smooth, Without Sharp Edges Or Burrs. Images And Inscriptions Are Resistant To Abrasion, Moisture And Ultraviolet Radiation. Fastening - Double-Sided Mounting Tape Of Increased Strength Or Hidden Mechanical Fastening. The Product Is Intended For Indoor Use. The Product Must Be New, Not Previously Used, Without Mechanical Damage, Made Of High-Quality Materials And Meet The Requirements Of An Accessible Environment. During Installation, It Is Recommended To Place The Sign Next To The Doorway At A Height Of 1.2–1.6 M From The Floor Level, Which Corresponds To The Recommendations For Placing Tactile Information., Straight Stainless Steel Handrail, Length 500 Mm - Used To Equip Bathrooms And Rooms For People With Limited Mobility. Type - Direct Wall Handrail For People With Limited Mobility. Length - 500 Mm. Material: Stainless Steel Or Steel Pipe With A Protective Anti-Corrosion Coating. The Diameter Of The Pipe Is At Least 30 Mm. The Coating Is Polished Or Powder-Polymer, Corrosion-Resistant. Maximum Load - At Least 100–150 Kg. The Design Is Rigid, Stationary, Wall-Mounted. Fastening Elements Are Included In The Delivery Set. The Surface Must Be Smooth, Without Sharp Edges Or Burrs. Designed For Installation In Sanitary Rooms, Corridors And Other Public Spaces. Straight Handrail 500 Mm - 1 Pc. Mounting Kit - 1 Set., Tactile Information Plate “Mnemonic Diagram” 600×400 Mm. Product Type - Tactile-Visual Information Mnemonic Diagram. Purpose - To Provide Information On The Location Of Premises, Traffic Routes And Organization Of Space For Visitors, Including People With Visual Impairments. The Size Of The Plate Is 600 × 400 Mm. Material Of Manufacture: Pvc Plastic, Acrylic, Composite Material Or Similar Wear-Resistant Material With A Thickness Of At Least 3 Mm. Execution: Wall-Mounted. The Information Must Be Completed: Relief (Tactile) Elements; Contrasting Color Markings; Using Braille For Basic Symbols (If Necessary). The Mnemonic Diagram Should Contain: Premises Layout Plan; Designation Of Inputs/Outputs; Direction Of Movement; Symbols Of Accessible Zones; Tactile Elements For Reading Information By Touch. The Height Of The Relief Elements Is At Least 1 Mm. The Color Design Is Contrasting, Ensuring Ease Of Perception For Visually Impaired Persons. The Surface Is Smooth, Without Sharp Corners, Chips Or Burrs. The Applied Information Must Be Resistant To Abrasion, Moisture And Wet Cleaning Products. Mounting - Hidden Mechanical Fastening Or Reliable Wall Mounting. Designed For Indoor Use. Tactile Mnemonic Diagram 600×400 Mm - 1 Pc. Mounting Kit - 1 Set. The Product Must Be New And Not Previously Used. The Product Must Meet The Requirements For Accessibility Of Information For People With Limited Mobility. All Elements Of The Mnemonic Diagram Must Be Clear, Visually Readable And Accessible To Tactile Perception.