Tenders Are Invited For Surface Consolidation Of Żytnia Street In Olszanka Using Asphalt Emulsion As Part Of The Task. Investment Entitled: Modernization Of Municipal Roads Using The Spraying Method Using Asphalt Emulsion

4.1 Description Of The Subject Of The Order: The Scope Of Works Includes Surface Consolidation Of The Road And Exits Using Asphalt Emulsion, 789.81 M Long, Area 4,176.59 M2, Including: A) A Layer Of Basalt Aggregate Fraction 2/5 Mm In An Amount Of 6.5 Kg/M2, B) Sprinkling With Modified Emulsion C 69 Bp3pu 0.8-1.1 L Per M2, C) A Layer Of Basalt Aggregate Fraction 5/8 Mm In An Amount Of 10.5 Kg/M2, D) Sprinkling With Modified Emulsion C 69 Bp3pu 1.8 - 1.9 L Per M2, E) Layer Of Basalt Aggregate Fraction 11/16 Mm In The Amount Of 15 Kg/M2, F) Sprinkling With Modified Emulsion C 69 Bp3pu 2.8 - 3.0 L Per M2, G) Layer Of Basalt Aggregate Fraction 16/22 Mm In The Amount 21 Kg/M2, H) Sprinkling With Modified Emulsion C 69 Bp3pu 4.0 - 4.2 Per M2, I) Leveling Layer Of Crushed Aggregate 0/31.5 Mm Thick. 3 Cm,J) Foundation Made Of Crushed Aggregate With Continuous Grain 0/31.5 Mm Thick. 10 Cm, K) Foundation Made Of Crushed Aggregate With Continuous Grain 0/31.5 Mm Thick. 15 Cm (On Widenings). Notes: 1) Aggregate Used For Surface Consolidation Must Be Dedusted Before Use. 2) The Detailed Scope Of Works Is Specified In The Design Documentation, Stwiorb And Bill Of Quantities. 3) At Each Request Of The Ordering Party, The Contractor Will Present The Ordering Party With A Cost Estimate Prepared Using The Detailed Calculation Method In Accordance With The Unit Prices And Price Factors Given In The Offer. 4) The Contractor Carrying Out The Works Is Obliged To Ensure Permanent Access To All Properties Adjacent To The Road. The Detailed Scope Of Works Is Specified In The Stwior Design Documentation Constituting Annex No. 10 To The Swz And The Bill Of Quantities Constituting Annex No. 9 To The Swz.4.3 Equivalent Solutions: In Each Case Of Using Standards, Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Are Used In The Design Documentation, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If Trademarks Are Used In The Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, It Means That They Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Use Equivalent Materials Or Devices, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will In No Way Adversely Affect The Proper Functioning Of The Solutions Adopted In The Design Documentation. The Contractor Who Uses Equivalent Devices Or Materials Will Be Obliged To Demonstra