Tenders Are Invited For Construction Of A Civil Defense Warehouse In Krasnobród

4.1. The Subject Of The Order Are Construction Works Consisting In Construction Of A Civil Defense Warehouse In The City Of Krasnobród.4.2. The Scope Of The Subject Of The Order Includes In Particular: 1) Construction Of A Civil Defense Warehouse With A Usable Area Of ​​Min. 267.57 M², In Traditional Brick Technology, With Walls Made Of Concrete Blocks And Aerated Concrete Thick. Min. 30 Cm, Rector Type Ceiling Thickness. Min. 30 Cm And A Roof Structure Made Of Ipn 280 Beams And Z150 Purlins, Covered With Sandwich Panels With A Pir Core, Gable Roof With An Inclination Of Min. 16°;2) Construction Of The Facade With Eps/Xps Insulation Thickness. 15–20 Cm, Silicone Plaster And A Mosaic Plaster Plinth; 3) Construction Of Windows, Doors And Garage Gates, Sheet Metal Flashings And A Roof Drainage System; 4) Construction Of An Industrial Floor Made Of C20/25 Thick Concrete. 20 Cm In The Garage Part And Floors Made Of Stoneware Tiles In Other Rooms, Along With Finishing Works And Sanitary Equipment; 5) Construction Of Complete Internal Installations: Water Supply, Sanitary Sewage, Gas Sewage, Central Heating, Electricity, Basic And Emergency Lighting, Lightning Protection; 6) Construction Of Connections To The Building In Accordance With The Design Documentation, 7) Construction Of A Hardened Access Road, Maneuvering Areas And Walkways Made Of Concrete Paving Stones Together With The Substructure, Edges And Drainage;8) Execution Of Accompanying Works, Including Landscaping, Tests, Tests And Measurements, As-Built Documentation And Preparation Of The Facility For Acceptance And Commissioning.4.3. A Detailed Description Of The Subject Of The Order Can Be Found In Annex No. 1 To The Swz. It Consists Of The Following Documents: 1) Design Documentation, Including: Architectural And Construction Design, Land Development Design, Technical Designs, 2) Technical Specification For The Execution And Acceptance Of Construction Works (Stwiorb) 3) Bills Of Quantities, Due To The Fact That The Contractors Remuneration Indicated In The Offer Will Be A Lump Sum, When Pricing The Offer, The Contractor Should Rely On The Scope Indicated In The Design Documentation Referred To In Point 4.3.1, Point 1) Swz And Stwiorb. The Bill Of Quantities Is Of An Auxiliary Nature. The Occurrence, During The Implementation Of The Contract, Of Works Not Included In The Bill Of Quantities Or Works In A Larger Quantity Than That Accepted In The Bill Of Quantities Will Not Entitle The Contractor To Demand Additional Remuneration - If These Works Were Included In The Design Documentation Referred To In Point 4.3.1, Point 1) Swz And Stwiorb. If The Content Of The Design Documentation And Stwiorb Contains Any Provisions Regarding The Conditions For The Implementation Of The Subject Of The Order, E.G. Rules For The Introduction Of Additional Or Replacement Works, Acceptance Of Works, Method Of Settlement, Which Are Not Reflected In The Content Of This Swz And The Drafted Provisions Of The Contrac