Tenders Are Invited For Delivery, Installation And Commissioning Of A New Screw Compressor With A Power Of Not Less Than 55 Kw

Delivery And Commissioning Of A New Device For The Production Of Compressed Air Along With The Transfer Of Already Operating Plant Equipment1. Description Of The Technical And Operational Parameters Of The Order Or Technical Data: Delivery, Installation And Commissioning Of A New Screw Compressor With A Power Of Not Less Than 55 Kw, Dismantling The Currently Installed Device And Relocation Between The Compressor Rooms Of One Of The Indicated Devices: 1) Dismantling The Indicated Compressor No. Plant,2) Relocation Of The Currently Installed Device From Compressor Room No. 2 To Compressor Room No. 1.A) Disassembly Of Compressor No. 1 Allegro 110 (Compressor Room No. 2) And Installation Of It In Place Of The Previously Dismantled Compressor No. 3 From Point 1 In Compressor Room No. 1,B) Connection And Start-Up Of The Compressor,3) Delivery, Installation And Start-Up Of A New Two-Stage Screw Compressor With A Power Of Not Less Than Than 55Kw In Place Of Compressor No. 1 In Compressor Room No. 2, Taking Into Account The Following: A) Compatible Controls With The Possibility Of Connecting To A Master Controller Controlling The Operation Of All Compressors In The Plant, B) The Delivered Device Must Have A Two-Stage Compression Ratio, C) Operating Efficiency Of Compressed Air Not Less Than 4 M3/Min In The Lower Operating Range, Not Less Than 10.5 M3/Min In The Upper Operating Range, D) G 2 Connection, E) The Device Must Have Dimensions No Larger Than Length/Depth/Height [Mm]: 2200/1350/1700. F) Specific Power Of The Device Minimum 6.00 Kw/M3, G) Noise Generated By The Device Max. 67Db(A) H) Device Motor In Ie5 Class - Magnet Motor. I) The Device Must Have Built-In Heat Recovery Module Enabling The Medium To Reach An Outlet Temperature Of 74°C, 4) Preparation Of The Design And As-Built Documentation (In Electronic And Paper Form). The Documentation Must Meet The Requirements Of The Regulations Regarding Machines And Devices. Iii. Warranty Conditions: Minimum 24 Months From The Date Of System Launch Order: The Price Should In Particular Include: 1) Additional Parts Necessary To Carry Out The Disassembly And Assembly Of All The Above-Mentioned Compressors, Not Specified In The Contract; 2) Provision Of Equipment Required To Carry Out The Work; 3) Travel, Accommodation, Other Necessary Security For Persons Performing The Work; 4) Transport Of Devices And Necessary Equipment; 5) Technical Measurements Necessary For The Proper Execution Of The Subject Of The Order; 6) Training Of Employees In The Use Of The System.