Tenders Are Invited For Industrial Machinery – Basic Mill For Foil Recycling With Adjustable Speed Range

Industrial Machinery – Basic Mill For Foil Recycling With Adjustable Speed Range. The Order Concerns The Purchase And Delivery Of A Basic Mill For Foil Recycling With An Adjustable Speed Range. Specification Of The Subject Of The Order: 1. Mill With Adjustable Speed Range - Basic Data: B) Number Of Rotor Revolutions In The Range From 100 To 300 Rpm. C) Rotor Length Ranging From 1600 To 1800 Mm, D) Minimum Width Of The Mill Inlet Opening 1850 Mm, E) Minimum Length Of The Mill Inlet Opening 1650 Mm, F) Welded Rotor Or An Equivalent Design Enabling The Extension Of Its Service Life. 2. Drive: A) Engine With A Rated Power Of 130 To 140 Kw. B) Control Using An Inverter, C) Adjustable Rotor Speed Range, D) Drive Transmission - Belt. 3. Knives: A) The Shape Of The Knife Blade - Octagonal, B) The Number Of Knives On The Rotor Ranges From 60 To 80 Pieces, C) Mounting The Knives On The Rotor In A V Arrangement, D) Mounting The Knives On The Rotor Enabling Its Rotation (Change Of Cutting Planes) By Min. 90 Degrees. 4. Key Functionalities: A) Minimum Efficiency Of 1.5 Mg/H, B) Detection Of Foreign Bodies, C) Openable Service Flap Enabling Removal Of Foreign Bodies (Large Contaminants) And Changing The Cutting Plane Of Knives Or Replacing Knives, D) Openable Sieve Basket Enabling Replacement Of Individual Sieve Segments, E) Possibility Of Setting The Cutting Gap From The Outside To Work, F) Smooth Speed Regulation And Automatic Quick Reverse Ensuring Forward Work Again. 5. Automation Control: A) Plc Control With Material Identification Program And Real-Time Motor Load Monitoring To Automatically Adapt To Different Input Materials; B) Equipped With An Operator Panel With A Touch Screen With A Diagonal Of Min. 10. Basic Requirements Below We Indicate The Basic Requirements Specified In Relation To The Subject Of The Order And The Bidder, The Inability Of Which To Be Met By The Bidder Results In A Negative Assessment And Rejection Of The Offer: 1. The Subject Of The Offer Must Relate To And Be Consistent With The Subject Of The Contract Described In Chapter Ii And Must Take Into Account The Specification Contained In Chapter Iii Of The Inquiry. 2. Achievement Of The Assumed Parameters (Functional And Technological) Of The Grinding Process Indicated In Chapter Iii, In Particular Parameter Relating To The Minimum Mill Efficiency Of 1.5 Mg/H. 3. Minimum Warranty Period For The Device - 4,000 Operating Hours Or 12 Months, Whichever Comes First. The Warranty Period Will Be Counted From The Date Of The Final Acceptance Report (Without Any Reservations) Of The Subject Of The Order: A) Handling Of The Notification In Polish; C) Maximum Deadline Arrival Of The Service If It Is Not Possible To Remove The Failure Remotely - 48 Hours; D) The Contractor Is Obliged To Remove The Defects Within A Maximum Of 4 Days From Their Notification By The Ordering Party; E) Due To The Type Of Work (Work In A Four-Team System), They Are Reported