Request For Quotation Purchase Of Household Supplies

Hinges With A Diameter Of At Least 20 Mm And A Length Of At Least 14 Cm Are Intended For Metal Doors. Hinges For Welding. Gost 5088-2005, Square Profile Pipe With A Cross-Section Of 10×10 Mm In Accordance With Gost 8639-82. Thickness Of At Least 0.8 Mm. The Weight Of One Linear Meter Is From 0.22 Kg (At 0.8 Kg). The Pipe Is At Least 6 Meters Long. Gost 13663-86., Rotband Plaster No Less Than 25 Kg Is A Universal Dry Construction Mixture Based On Gypsum Binder With Polymer Additives, Intended For High-Quality Plastering Of Walls And Ceilings Manually Indoors. Gost R 58279. Parameter Value / Indicator Mixture Base Gypsum With Light Aggregate And Polymers Layer Thickness (One Application) Walls: 5 - 50 Mm (Up To 50 Mm Locally); Ceilings: 5 - 15 Mm Maximum Fraction Size Up To 1.2 Mm Consumption With A Layer Of 10 Mm ≈ 8.5 Kg/M² Output Of Mortar Mixture From 100 Kg Of Dry Mixture ≈ 120 Liters Of Solution Viability Of The Solution 20 - 25 Minutes After Mixing With Water. Drying Time Of The Layer 15 - 20 Mm≈ 7 Days (Depending On Ventilation And Temperature) Compressive Strength No Less Than 2.0 Mpa (After 28 Days) Flexural Strength No Less Than 1.0 Mpa Adhesion (Adhesion To Concrete) No Less Than 0.5 Mpa Application Conditions Base And Air Temperature From +5 ° C To +30 ° C, Galvanized Corrugated Sheet, Thickness No Less Than 0.45 Mm, Length No Less Than 6 M. Gost 24045-2016., Square Profile Pipe With A Cross Section Of 4×2 Mm. Thickness Of At Least 2 Mm. Pipe Length Of At Least 6 Meters. Gost 13663-86., Decorative Plaster “Rain” Is A Popular Method Of Applying Relief Plasters That Imitates Streams Of Pouring Rain Due To Vertical Or Diagonal Grooves. Ready-Made Dry Mixes Based On Cement Are Produced According To The St Rk 1168-2006 Standard For External And Internal Work. Weight Not Less Than 25 Kg. Fraction (Grain) Size: From 2.0 To 3.0 Mm (Sets The Depth Of The “Rain” Furrows). Material Consumption: From 2.5 To 4.0 Kg Per 1 M². Solution Viability: About 2 Hours After Mixing With Water. Adhesion Strength (Adhesion): No Less Than 0.4 Mpa. Compressive Strength Grade: M25 (No Less Than 2.5 Mpa). Frost Resistance: Grade F25 (Withstands Up To 25 Freezing/Thawing Cycles). Complete Drying Time: 24 Hours At A Temperature Of +20 °C., A 5.5 Mm Screw (Self-Tapping Screw) For Metal Is A Durable Fastener With A Frequent Thread And A Drill (Drill) At The End, Which Eliminates Pre-Drilling When Installing In Metal Up To 3-5 Mm. The Main Types Include Roofing Screws With A Hex Head And A Press Washer. Gost 10621-80, Paint For Concrete Floors Ak-518 Is Intended For Protective Painting Of Cement-Concrete Floors Indoors And Outdoors, As Well As Rooms With Increased Mechanical Loads (Industrial, Commercial, Warehouses, Garages, Auto Repair Shops, Etc.). Color - Gray. Purpose - Concrete. Packaging: No Less Than 20 Kg., Welding Electrodes With A Diameter Of At Least 2 Mm Are Used For Welding Thin Metal. Manufactured According To Gost 9466-75 Standards., Paving Stones Measuring At Least 30X30x3 Cm. Color To Be Agreed With The Customer. Thickness Of At Least 3 Cm (30 Mm). Weight: One Tile Weighs About 6–6.5 Kg., The Primer Is A Universal Acrylic Primer With Deep Penetration, Designed For High-Quality Preparation Of Mineral Surfaces Before Applying Finishing Materials. It Is Used For Treating Walls And Ceilings Indoors And Provides A Reliable Basis For Further Work. Packaging Of The Material Is Not Less Than 10 Liters. St Rk Gost R 51693-2003, Cutting Disc With A Diameter Of At Least 180. Gost R 57978-2017, Concrete Contact. Weight Not Less Than 10Kg. Purpose For Walls. Application By Roller Or Brush. The Processing Surface Is Concrete. Application For Concrete. Consumption 150-200 Ml. Type Primer Release Form: Ready Solution. Gost R 52020-2003, Screws (Self-Tapping Screws) Of At Least 3X30 Mm For Metal Are Fasteners With A Frequent Thread Pitch And A Sharp Tip (Or Drill) Intended For Mounting Sheet Metal And Profiles. To Work With Metal, Choose Galvanized Hardware., Square Profile Pipe With A Cross Section Of 80×40 Mm. Thickness Of At Least 3 Mm. Pipe Length Of At Least 6 Meters. Gost 13663-86.